1. Canada
  2. All 3M Products
  3. Building Materials
  4. Fire Protection
  5. Firestop Sealants, Foams, Putties & Mortars
  6. 3M™ Fire Barrier Sealant, FD 150+, blue, 28 fl. oz. (828 mL)

3M™ Fire Barrier Sealant, FD 150+, blue, 28 fl. oz. (828 mL)

  • 3M ID 7000133848
  • UPC 00051115116025
Container Size (Metric) 828 mL
Container Size (Imperial) 28 fl oz
Product Type Sealant

Firestop tested up to 3 hours in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115

Fire Resistive Joint System tested up to 4 hours in accordance with ASTM E 1966 (UL 2079)

±19% movement capability

View more details
Frequently viewed resources
PDF (1) Copy 26Safety Data Sheet (PDF, 0B)

Details

Highlights
  • Firestop tested up to 3 hours in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115
  • Fire Resistive Joint System tested up to 4 hours in accordance with ASTM E 1966 (UL 2079)
  • ±19% movement capability
  • Helps minimize noise transfer
  • Applied with conventional caulking equipment (excellent caulk rate)
  • Halogen-free
  • Sag-resistant
  • Excellent adhesion
  • Paintable
  • Re-enterable/repairable
  • Available in blue, red or limestone, no mixing required

3M™ Fire Barrier Sealant FD150+ is a ready-to-use, gun-grade, latex-based elastomeric sealant that cures upon exposure to the atmosphere to form a monolithic flexible firestop seal.

When properly installed, this product provides up to 4 hours of fire protection in tested and listed systems and helps prevent the spread of fire, smoke and noxious gas. It remains elastomeric (compression/extension capability of ± 19%) and exhibits excellent adhesion to a full range of construction substrates. In addition, this product acts as an acoustic barrier by minimizing noise transfer (STC-Rating of 56 when tested in a STC 56-rated wall assembly), helps create a smoke seal for systems requiring the optional L-Rating, meets the intent of LEED® green building program credits VOC environmental regulations,, meets International Building Code (IBC) and other key life safety building code requirements.

Suggested applications
  • Firestops construction joints including: bottom-of-wall, head-of-wall and wall-to-wall
  • Typically used in mechanical, electrical and plumbing applications to firestop openings created by penetrations in fire-rated floors, floor/ceilings or walls such as metallic pipe, plastic pipe (excluding CPVC), conduit, power and communication cable, cable trays, bus ways, combos, insulated pipe and HVAC duct penetrations

Typical Properties

Brands

3M™

Composition

Acrylic

Container Size (Imperial)

28 fl oz

Container Size (Metric)

828 mL

Fire Resistance Type

Ablative

Maximum Service Temperature (Celsius)

82 °C

Maximum Service Temperature (Fahrenheit)

180 null

Minimum Service Temperature (Celsius)

-28 °C

Minimum Service Temperature (Fahrenheit)

-20 null

Movement Capability

19%

Product Form

Cartridge

Product Type

Sealant

STC Rating

Up to 56 in a 56 Rated Wall

Smoke Developed Index

5

Smoke Seal

Yes

Water Activated

No

Water-tight

No

Resources

Safety Data Sheets

Document Number: MSDS_2654754_CA_EN

(PDF , 0B)