3M™ Heat Shrink Thin-Wall Flexible Polyolefin Adhesive-Lined Tubing, EPS-300, black, 3/4 in x 48 in (1.91 cm x 121.92 cm)
- 3M ID 7100079242
- UPC 00051128597958
Details
Highlights
- 3:1 shrink ratio
- When freely recovered, the tubing will shrink 33% of its as-supplied diameter
- The recovered wall thickness of the tubing is proportional to the degree of recovery
- Operating temperature range is from 55°C (-67°F) to 110°C (230°F), with a shrinking temperature minimum of 121°C (250°F)
- Withstands temperatures of -67 to 230 degrees F (-55 to 110 degrees C)
3M™ Heat Shrink Thin-Wall Flexible Polyolefin Adhesive-Lined Tubing EPS-300 is a 3:1 thin-wall tubing that offers the advantages of integral, adhesive-lined construction.
3M™ Heat Shrink Thin-Wall Flexible Polyolefin Adhesive-Lined Tubing EPS-300 is made from flame-retardant, flexible polyolefin that is lined with an internal layer of special thermoplastic adhesive. The heat-shrinkable outer wall is selectively radiation cross-linked, while the adhesive maintains high flow and excellent adhesion characteristics. It helps provide environmental protection for electronic components, twister pigtail and inline wire splices, crimp splices, wire bundles and wire harness breakouts in automotive, truck fleet, marine and industrial applications. When heated in excess of 121°C (250°F), the tubing rapidly shrinks to a skin-tight fit, forcing the melted adhesive lining to flow and cover the substrate. The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. Upon cooling, the adhesive solidifies, forming a permanent, non-drying, flexible and water-resistant barrier. Adhesive reflow will occur at temperatures above 80°C (176°F). This product is UL Recognized (all colours except clear, file E-157227) at 600 volts to a maximum of 125°C and is CSA Certified (CSA file LR38227).
Suggested applications
- Protection for electronic components, twister pigtail and inline wire splices, crimp splices, wire bundles and wire harness breakouts in automotive, truck fleet, marine and industrial applications
- Forms a flexible bond with a wide variety of rubbers, plastics and metals
Typical Properties
| Brands | 3M™ |
| Elongation | 450 % |
| Expanded Inner Diameter | 0.75 in |
| Expanded Inner Diameter (metric) | 19.1 mm |
| Flame Retardant | Yes |
| Flammability Rating | UL 224 All Tubing Flame Test [jacket] |
| Inner Diameter After Shrink (Imperial) | 0.25 in |
| Inner Diameter After Shrink (Metric) | 6.35 mm |
| Inner Diameter Before Shrink (Imperial) | 0.75 in |
| Inner Diameter Before Shrink (Metric) | 19.05 mm |
| Material | Polyolefin |
| Maximum Operating Temperature (Celsius) | 110 °C |
| Maximum Operating Temperature (Fahrenheit) | 230 null |
| Minimum Expanded Tubing I. D. | 0.75 in |
| Non-Corrosive | Yes |
| Operating Temperature (Celsius) | -55 °C to 110 °C |
| Operating Temperature (Fahrenheit) | -67 °F to 230 °F |
| Operating Temperature Range (Celsius) | -55 °C to 110 °C |
| Operating Temperature Range (Fahrenheit) | -67 °F to 230 °F |
| Product Colour | Black |
| Recovered Inner Diameter | 0.25 in |
| Recovered Inner Diameter (metric) | 6.4 mm |
| Shrink Ratio | 3:1 |
| Solution for | Wireless Network: Infrastructure Accessories, Access Network: xDSL, Access Network: FTTH/FTTB/CATV |
| Tensile Strength (Imperial) | 2100 Pound-Force Per Square Inch |
| Tubing Type | Dual Wall (Adhesive Lined) |
| UL File Number | E-157227 |
| Units per Case | 5.0 |
| Overall Length (Imperial) | 48 in |
| Overall Length (Metric) | 1219 mm |
Resources
Article Information Sheet
Document Number: MSDS_2656692_CA_EN_AIS
(PDF)
