3M™ Cold Shrink QT-III Three Conductor Cable Termination Kit 7625-T-95-3G, tape, wire and UniShield®, 8.7 kV, 1.18-1.51 in (29.97-38.35 mm) cable insul. O.D., 3 terminations per kit
- 3M ID 7100047881
- UPC 00054007436683
Details
Highlights
- Quick installation with versatile one-piece design
- No torches, heat or special tools required
- Hi-K stress control
- Excellent tracking resistance
- Includes everything required to make 3 terminations (except lugs)
- Also includes Rejacketing Sleeve Assembly and Breakout boot
- Conductor size ranges: 5 kV (100%): 4/0 AWG-350 kcmil, 5 kV (133%): 3/0 AWG-350 kcmil, 8 kV (100% or 133%): 3/0 AWG-350 kcmil, 15 kV (100%): 1/0-4/0 AWG, 15 kV (133%): 2-3/0 AWG, 25/28 kV (100%): 1-1/0 AWG
3M™ Cold Shrink QT-III 7600-T-3G Series Termination Kit includes a non-skirted, 3-phase termination. It ensures a pliable, tight seal for tape shield, wire shield and UniShield® power cables. The silicone rubber sealing compounds allow the termination to withstand voltages of 5 to 35kV.
Each kit contains: One 3M™ Cold Shrink Silicone Rubber Breakout Boot Assembly, one 3M™ Cold Shrink Silicone Rubber Jacket Seal Assembly, three 3M™ Silicone Rubber Phase Rejacketing Sleeve Assemblies, three 3M™ Cold Shrink Silicone Rubber Termination Assemblies, one 3M™ Tinned Copper Ground Braid Assembly, three small 3M™ Constant-Force Springs, one large 3M™ Constant-Force Spring, eight strips of Scotch® Mastic 2230, one 3/4" (19.05 mm) roll of Scotch® Super 33+™ Vinyl Electrical Tape, one 1-1/2" (25.4-12.7 mm) roll of Scotch® Vinyl Electrical Tape Super 88, one roll of Scotch® Electrical Shielding Tape 24, one 3M™ Cable Cleaning Preparation Kit CC-2, three 1/2" x 10" (12.7 mm x 254 mm) strips of 3M™ EMI Copper Foil Shielding Tape 1181, and one Instruction Sheet.
Suggested applications
- Terminating solid dielectric shielded power cable
- Tape shielded cable (armored or unarmored)
- Free-hanging or bracket-mounting arrangements
- Compact design provides for easier installation in restricted spaces
- For cables with internal ground wires
- *For Wire and Unishield® cables please contact your 3M representative for technical assistance
Typical Properties
| BIL | 95 kV |
| Brands | 3M™ |
| Breakout Boot | Yes |
| Cable Insulation Outside Diameter Range | 1.18-1.52 in |
| Cable Insulation Outside Diameter Range (metric) | 30.0-38.6 mm |
| Cable Shielding | Tape Shield, Wire Shield, UniShield®, Wire-Over-Tape Shield |
| Case Quantity | 1 |
| Conductor Sizes (Imperial) | 700 kcmil, 750 kcmil, 800 kcmil, 900 kcmil, 1000 kcmil |
| Indoor/Outdoor | Indoor Non-skirted |
| Insulation Level | 100%, 133% |
| Insulation Outer Diameter (Imperial) | 1.18 in, 1.19 in, 1.2 in, 1.21 in, 1.22 in, 1.23 in, 1.24 in, 1.25 in, 1.26 in, 1.27 in, 1.28 in, 1.29 in, 1.3 in, 1.31 in, 1.32 in, 1.33 in, 1.34 in, 1.35 in, 1.36 in, 1.37 in, 1.38 in, 1.39 in, 1.4 in, 1.41 in, 1.42 in, 1.43 in, 1.44 in, 1.45 in, 1.46 in, 1.47 in, 1.48 in, 1.49 in, 1.5 in, 1.51 in, 1.52 in |
| Insulation Outer Diameter (metric) | 29.972 mm, 30.226 mm, 30.48 mm, 30.734 mm, 30.988 mm, 31.242 mm, 31.496 mm, 31.75 mm, 32.004 mm, 32.258 mm, 32.512 mm, 32.766 mm, 33.02 mm, 33.274 mm, 33.528 mm, 33.782 mm, 34.036 mm, 34.29 mm, 34.544 mm, 34.798 mm, 35.052 mm, 35.306 mm, 35.56 mm, 35.814 mm, 36.068 mm, 36.322 mm, 36.576 mm, 36.83 mm, 37.084 mm, 37.338 mm, 37.592 mm, 37.846 mm, 38.1 mm, 38.354 mm, 38.608 mm |
| Insulation Rejacketing | Yes |
| Lug/Stem Connector Included in Kit | No |
| Maximum Cable Outside Diameter | 4.50 in |
| Maximum Cable Outside Diameter (Metric) | 114.3 mm |
| Maximum Installed Length | 8.50 in |
| Number of Conductors | 3 |
| Product Series | 7600-3G, 7600-T-3G |
| Voltage | 5 kV, 8 kV |
| Voltage Application | Medium Voltage |
Resources
Safety Data Sheets
Document Number: MSDS_2654440_CA_EN
(PDF)
