3M™ Wraparound Heat Shrink Cable Repair Sleeve, HDCW-110/30-500, 30 x 19.7 in (76.2 x 50.04 cm)
- 3M ID 7100031028
- UPC 04001895590719
Details
Highlights
- Quick and easy to apply
- Provides maximum protection against mechanical stress
- Achieves a safe, watertight bond
- Corrosion proof metal clip fully closes the sleeve
- Thick-walled sheet is tough and reliable
- ANSI Certified and RoHS 2011/65/EU Compliant
3M™ Wraparound Heat Shrink Cable Repair Sleeves are designed to repair damaged cable sheaths. They are also suitable for use with cable joints or as additional corrosion protection on undamaged cables.
3M™ Wraparound Heat Shrink Cable Repair Sleeves help provide maximum protection against mechanical stress, even in the most aggressive environments. Coated with hot melt adhesive, the inner wall of the sleeve is able to achieve a safe and watertight bond with the cable, providing a perfect seal when heat is applied. A corrosion proof metal clip is used to fully close the sleeve.
Suggested applications
- Ideal for cable jacket repair on cables up to 35kV
- Use as additional corrosion protection on undamaged cables
- Can be used as primary insulation on low voltage cables up to 1000V
Typical Properties
| Adhesive Lined | Yes |
| Adhesive Material | Hot melt adhesive layer |
| Brands | 3M™ |
| Cable Type | Any type of cable |
| Chemical Resistant | Yes |
| Conductor Sizes (Imperial) | 1000 kcmil, 1250 kcmil, 1500 kcmil, 1750 kcmil, 2000 kcmil |
| Conductor Sizes (Metric) | 1013 mm² |
| Elongation | 3 % |
| Expanded Inner Diameter | 5.2 in |
| Expanded Inner Diameter (metric) | 132 mm |
| Expanded Sleeve Diameter | 4.72 in |
| Flame Retardant | No |
| Halogen Free | Yes |
| Inner Diameter After Shrink (Imperial) | 1 in |
| Inner Diameter After Shrink (Metric) | 25 mm |
| Inner Diameter Before Shrink (Imperial) | 5.2 in |
| Inner Diameter Before Shrink (Metric) | 132 mm |
| Jacket Repair Range | 1.18 to 4.33 Inch |
| Material | Adhesive-lined, Cross-Linked Polyolefin |
| Maximum Voltage Rating | 1 kV to 35 kV |
| Minimum Expanded Tubing I. D. | 4.72 in |
| Minimum Shrink Temperature (Celsius) | 125 °C |
| Product Colour | Black |
| Product Form | Sleeve-roll |
| Product Type | Splice |
| Recovered Sleeve Diameter | 1.1 in |
| Sleeve Length | 19.7 in |
| Splice Configuration | Heat Shrink Cable Repair Wrap Sleeve (HDCW) |
| Splice Type | Heat Shrink |
| UV Resistant | Yes |
| Units per Case | 5.0 |
| Voltage | 1 kV, 8 kV, 15 kV, 35 kV, 25/28 kV |
| Overall Length (Imperial) | 19.7 in |
| Overall Length (Metric) | 500 mm |
Resources
Safety Data Sheets
Document Number: MSDS_1976984_CA_EN
(PDF)
