3M™ Cold Shrink QS-III Splice Kit 5514A-500-AL Tape Shield, 1/Case
- 3M ID 7100027557
- UPC 00054007444077
Details
Highlights
- Inline splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables
- Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
- Designed for feeder and distribution circuits, it transitions from shielded to neutral power cables and fits type MV-90 cables
- Silicon rubber-splice body provides good high and low-temperature performance, and the EPDM rubber jacket offers physical protection
- Rated for 15 kV class cables
- Factory-tested partial discharge and AC ensure reliability
3M™ Cold Shrink QS-III Splice Kits 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²).
The 3M™ Cold Shrink QS-III Splice Kit 5513A, 5514A, 5515A and 5516A Series includes a cold shrink splice body in a one-piece moulded design made of specially formulated silicone rubbers, with jacketing is made of EPDM rubber for physical protection. Each splice manufactured is factory tested to provide reliability. The splices can be used with standard copper (Cu) or aluminum (Al/Cu) inline compression (crimp type) connectors, and can be used for size transitions within the listed kit size range. They are designed to exceed minimum industry test standards, and have a BIL rating of 150 kV (equal to a 25 kV voltage class). The 5513A, 5514A, 5515A and 5516A QS-III splices meet or exceed the 15 kV Voltage Class rating requirements of IEEE 404. Each kit makes one splice. Cable sizes shown below are for standard insulation thickness.
Suggested applications
- For inline splicing
- For feeder and distribution circuits
- For Tape, Wire, UniShield® & Longitudinally corrugated (LC) shielded cables
- For transitions from shielded to neutral power cables
- For copper or aluminum conductors
- For size transition splicing
- For direct burial installations
- For submerged locations
Typical Properties
| Applications | Cable Connection |
| Brands | 3M™ |
| Cable Shielding | Tape Shield, Longitudinally Corrugated (LC), Wire Shield, UniShield® |
| Conductor Material | Aluminum |
| Conductor Sizes (Imperial) | 500 kcmil |
| Insulation Level | 1.33, 100%, 133% |
| Insulation Outer Diameter (Imperial) | 0.84 in, 0.85 in, 0.86 in, 0.87 in, 0.88 in, 0.89 in, 0.9 in, 0.91 in, 0.92 in, 0.93 in, 0.94 in, 0.95 in, 0.96 in, 0.97 in, 0.98 in, 0.99 in, 1 in, 1.01 in, 1.02 in, 1.03 in, 1.04 in, 1.05 in, 1.06 in, 1.07 in, 1.08 in, 1.09 in, 1.1 in, 1.11 in, 1.12 in, 1.13 in, 1.14 in, 1.15 in, 1.16 in, 1.17 in, 1.18 in, 1.19 in, 1.2 in, 1.21 in, 1.22 in, 1.23 in, 1.24 in, 1.25 in, 1.26 in, 1.27 in, 1.28 in, 1.29 in, 1.3 in, 1.31 in, 1.32 in, 1.33 in, 1.34 in, 1.35 in, 1.36 in, 1.37 in, 1.38 in |
| Number of Conductors | 1 |
| Product Colour | Black |
| Product Series | 5610A |
| Splice Type | Cold Shrink |
| Voltage | 15 kV |
Resources
Safety Data Sheets
Document Number: MSDS_2643724_CA_EN
(PDF)
