3M™ Repulpable Single Coated Splicing Tape 910, Blue, 0.9 in x 60 yd (24 mm x 55 m), 3.7 mil (0.09 mm), 36 Rolls/Case
- 3M ID 7100027354
- UPC 00051131175433
Details
Highlights
- Off-White, semi-bleached kraft backing, single-sided tape
- Blue, repulpable adhesive has excellent heat resistance up to 400⁰F (204⁰C)
- Single coated, butt splicing, light-weight coated paper
- Repulpable adhesive prevents broke contamination from non-repulpable splice material
- Meets or exceeds TAPPI UM-213, procedure A, FDA compliant 21 CFR 176.170 (Components of paper and paperboard in contact with aqueous and fatty food) and 176.180 (Components of paper and paperboard in contact with dry food)
3M™ Repulpable Single Coated Splicing Tape is designed primarily for butt splicing LWC paper grades. It has a single-coated, repulpable construction using a release coated, semi-bleached, off-white kraft paper backing and a blue, repulpable adhesive.
3M™ Repulpable Single Coated Splicing Tape is used for splicing light-weight coated papers, particularly gravure papers. 3M™ Repulpable Single Coated Splicing Tape performs well in many other finished splice applications – even with "alkaline coatings" and stearate sizing. Coatings and inks do not anchor to the back side of this tape.
Suggested applications
- Butt splicing LWC paper grades
- Taping to the “lip” and “tail” on perfect splices
- Paster hold down tabs
Typical Properties
| Adhesive Type | Repulpable |
| Applications | Butt Splices |
| Brands | 3M™ |
| Industries | Paper |
| Maximum Operating Temperature (Fahrenheit) | 400 null |
| Number of Adhesive Sides | Single-sided |
| Product Colour | Blue |
| Product Form | Roll |
| Tape Type | Single Coated |
| Tensile Strength (metric) | 42 N/100mm |
| Total Tape Thickness without Liner (Imperial) | 3.7 Milli-inch (mil) |
| Total Tape Thickness without Liner (metric) | 0.094 mm |
| Overall Length (Metric) | 55 m |
| Overall Thickness (Imperial) | 4 Milli-inch (mil) |
| Overall Width (Imperial) | 0.95 in |
| Overall Width (Metric) | 24 mm |
