3M™ Heat Shrink Thin-Wall Tubing, FP-301, clear, 3/8 in x 100 ft (0.38 cm x 30.48 m) spool
- 3M ID 7100025599
- UPC 00051135355855
Details
Highlights
- Rated for 135°C (275° F) continuous operation
- Designed to withstand elevated temperatures to 300°C (572°F) for short periods of time
- 2:1 shrink ratio
- Flexible and split resistant
- Rated for 600V applications
- Flame-retardant tubing is rated for 600V applications
3M™ Heat Shrink Thin-Wall Tubing is a heat-shrinkable, flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications.
3M™ Heat Shrink Thin-Wall Tubing is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering. The tubing is split resistant, mechanically tough, easily marked and resists cold flow. This product meets the requirements of SAE-AMS-DTL-23053/5, Class 1, Class 2 (clear) AMS-3636, AMS-3637, is Underwriters Laboratories (UL) Recognized, File E-39100, at 600 volts maximum at 125°C and is CSA Certified, CSA LR38227, at 600 volts maximum at 125°C.
Suggested applications
- Typically used as shrink-fit electrical insulation over cable splices and terminations
- Used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire-resistant covering
Typical Properties
| Additional Flammability Rating | 23053/5 class1 |
| Agency Approvals | UL Recognized, CSA Certified, ABS, and AMS 3636 & 3637 |
| Applicable SAE-AMS-DTL-23053 Specifications | 23053/5 class 1 |
| Brands | 3M™ |
| Elongation | 400 % |
| Expanded Inner Diameter | 0.375 in |
| Expanded Inner Diameter (metric) | 9.53 mm |
| Flame Retardant | No |
| Flammability Rating | No Flame Rating |
| Inner Diameter After Shrink (Imperial) | 0.187 in |
| Inner Diameter After Shrink (Metric) | 4.75 mm |
| Inner Diameter Before Shrink (Imperial) | 0.375 in |
| Inner Diameter Before Shrink (Metric) | 9.53 mm |
| Material | Flexible Polyolefin |
| Maximum Operating Temperature (Celsius) | 135 °C |
| Maximum Operating Temperature (Fahrenheit) | 275 null |
| Mil Spec | AMS-DTL-23053/5, Class 2 |
| Minimum Expanded Tubing I. D. | 3 in |
| Minimum Shrink Temperature (Celsius) | 100 °C |
| Non-Corrosive | Yes |
| Operating Temperature (Celsius) | -55 to 135 Degrees Celsius |
| Operating Temperature (Fahrenheit) | -67 °F to 275 °F |
| Operating Temperature Range (Celsius) | -55 °C to +135 °C |
| Operating Temperature Range (Fahrenheit) | -67 °F to 275 °F |
| Product Colour | Transparent |
| Recovered Inner Diameter | 3 in |
| Recovered Inner Diameter (metric) | 4.75 mm |
| Shrink Ratio | 2:1 |
| Solution for | Access Network: xDSL, Access Network: FTTH/FTTB/CATV, Wireless Network: Backhaul, Longhaul/Metro Loop Network: Outdoor, Longhaul/Metro Loop Network: CO/POP, Wireless Network: Infrastructure Accessories |
| Tensile Strength (Imperial) | 2400 Pound-Force Per Square Inch |
| Tubing Type | Single Wall (Thin) |
| UL Approval | Yes |
| UL File Number | E-39100 |
| Units per Case | 3.0 |
| With Inner Glue | No |
| Overall Length (Imperial) | 100 ft |
| Overall Length (Metric) | 30.5 m |
Resources
Article Information Sheet
Document Number: MSDS_0618199_CA_EN_AIS
(PDF)
