3M™ Cold Shrink Corrosion Protection Kit, CPT-3 1/2, cable minimum O.D. 2.90 in (74 mm)
- 3M ID 7100008234
- UPC 00054007430292
Details
Highlights
- Quick and easy to install
- Cold shrink sleeve maintains pressure and resiliency over time
- Meets salt spray requirements
- Insulator is formulated with EPDM rubber which contains no chlorides or sulfur
- Provides tight sealing between NPT fitting threads and the enclosure using mastic strips
- Includes an insulator assembly, mastic seal strip pack and instruction sheet
3M™ Corrosion Protection Kit is designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments. Mastic strips are provided for sealing between NPT fitting threads and the enclosure in use (junction box, cabinet, panel board, etc.).
The sleeve has a 2.90 in (74 mm) O.D. (minimum) and the connector has a 6.00 in (152 mm) maximum O.D. and a 10.0 in (254 mm) maximum installed length.
Suggested applications
- To protect bulkhead termination connectors in highly corrosive environments
Typical Properties
| Brands | 3M™ |
| Cable Minimum Outside Diameter | 2.90 in |
| Cable Minimum Outside Diameter (metric) | 73.7 mm |
| Connector Maximum Installed Length | 13.50 in |
| Connector Maximum Installed Length (metric) | 343 mm |
| Connector Maximum Outside Diameter | 6.00 in |
| Connector Maximum Outside Diameter (metric) | 152.4 mm |
| Material | EPDM Rubber |
| Maximum Cable Diameter (Imperial) | 6 in |
| Maximum Cable Diameter (Metric) | 152.4 mm |
| Maximum Cable Outside Diameter (Metric) | 73,7 mm |
| Minimum Cable Diameter (Imperial) | 2.9 in |
| Minimum Cable Diameter (Metric) | 73.7 mm |
| Units per Case | 5.0 |
Similar products
| Brands | 3M™ | |
| Cable Minimum Outside Diameter | 2.90 in | |
| Cable Minimum Outside Diameter (metric) | 73.7 mm | |
| Connector Maximum Installed Length | 13.50 in | |
| Connector Maximum Installed Length (metric) | 343 mm | |
| Connector Maximum Outside Diameter | 6.00 in | |
| Connector Maximum Outside Diameter (metric) | 152.4 mm | |
| Material | EPDM Rubber | |
| Maximum Cable Diameter (Imperial) | 6 in | |
| Maximum Cable Diameter (Metric) | 152.4 mm | |
| Maximum Cable Outside Diameter (Metric) | 73,7 mm | |
| Minimum Cable Diameter (Imperial) | 2.9 in | |
| Minimum Cable Diameter (Metric) | 73.7 mm | |
| Units per Case | 5.0 |
3M™ Cold Shrink Corrosion Protection Kit, CPT-3 1/2, cable minimum O.D. 2.90 in (74 mm)
3M™ Electrostatic Animal Guards