3M™ Cold Shrink QT-III, Three Conductor Termination Kit 7620-S-3G Series are skirted and designed for outdoor installations of medium voltage 3/C shielded power cables with internal ground wires. The Hi-K stress control design delivers excellent BIL performance and lower surface stress, resulting in a more compact termination.
Each kit contains: One 3M™ Cold Shrink Silicone Rubber Breakout Boot Assembly, one 3M™ Cold Shrink Silicone Rubber Jacket Seal Assembly, three 3M™ Silicone Rubber Phase Re-Jacketing Sleeve Assemblies, three 3M™ Cold Shrink Silicone Rubber Termination Assemblies, one 3M™ Tinned Copper Ground Braid Assembly, three small 3M™ Constant Force Springs, one large 3M™ Constant Force Spring, three 1/2” x 10” (12.7 mm x 254 mm) strips of 3M™ EMI Copper Foil Shielding Tape 1181, eight strips Scotch® Mastic 2230, one 3/4" (19.05 mm) roll of Scotch® Super 33+™ Vinyl Electrical Tape, one 1-1/2" (25.4-12.7 mm) roll of Scotch® Super Vinyl Electrical Tape 88, one roll of Scotch® Copper Electrical Shielding Tape 24, one 3M™ Cable Cleaning Preparation Kit CC-2, and one Instruction Sheet.
BIL | 150 kV |
Brands | 3M™ |
Breakout Boot | Yes |
Cable Insulation Outside Diameter Range | 0.92-1.18 in |
Cable Insulation Outside Diameter Range (metric) | 23.4-30.0 mm |
Cable Shielding | Wire Shield, UniShield®, Tape Shield |
Case Quantity | 1 |
Conductor Sizes (Imperial) | 1 AWG, 1/0 AWG, 2/0 AWG, 3/0 AWG, 4/0 AWG, 250 kcmil, 300 kcmil, 350 kcmil, 400 kcmil, 500 kcmil |
Indoor/Outdoor | Outdoor Skirted |
Insulation Level | 100%, 133% |
Insulation Outer Diameter (Imperial) | 0.92 in, 0.93 in, 0.94 in, 0.95 in, 0.96 in, 0.97 in, 0.98 in, 0.99 in, 1 in, 1.01 in, 1.02 in, 1.03 in, 1.04 in, 1.05 in, 1.06 in, 1.07 in, 1.08 in, 1.09 in, 1.1 in, 1.11 in, 1.12 in, 1.13 in, 1.14 in, 1.15 in, 1.16 in, 1.17 in, 1.18 in |
Insulation Outer Diameter (metric) | 23.368 mm, 23.622 mm, 23.876 mm, 24.13 mm, 24.384 mm, 24.638 mm, 24.892 mm, 25.146 mm, 25.4 mm, 25.654 mm, 25.908 mm, 26.162 mm, 26.416 mm, 26.67 mm, 26.924 mm, 27.178 mm, 27.432 mm, 27.686 mm, 27.94 mm, 28.194 mm, 28.448 mm, 28.702 mm, 28.956 mm, 29.21 mm, 29.464 mm, 29.718 mm, 29.972 mm |
Insulation Rejacketing | Yes |
Lug/Stem Connector Included in Kit | No |
Maximum Cable Outside Diameter | 3.90 Inch |
Maximum Cable Outside Diameter (Metric) | 99.1 mm |
Maximum Installed Length | 12.25 in |
Number of Conductors | 3 |
Number of Skirts | 4 |
Product Series | 7600-S-3G |
Voltage | 5 kV, 8 kV, 15 kV, 25 kV |
Voltage Application | Medium Voltage |
Safety Data Sheets
Document Number: MSDS_2651776_CA_EN
(PDF)