3M™ Cold Shrink Splice Jacket Kit, SJ-2A, Jacketed Concentric Neutral (JCN) cable, 15-35 kV
- 3M ID 7000140679
- UPC 00054007697435
Details
Highlights
- Quick and easy to install
- Resists fungus, acids, alkalies, ozone and UV light
- No torches or heat required
- Seals tight and maintains resiliency and pressure long term
- Water resistant
- Resists fungus, acids, alkalis, ozone and ultraviolet light
3M™ Cold Shrink Splice Jacket Kits SJ-A series offer advanced, one-piece, water-tight rejacketing for JCN cable splices. Designed as an accessory kit to rejacket over molded rubber splices, this product is made from a durable EPDM rubber.
Each kit contains enough material to jacket one cable splice; one 3M™ Cold Shrink Jacketing Tube and one roll of Scotch® Rubber Mastic Tape 2228.
Suggested applications
- To jacket medium voltage inline splices
- For use on JCN and other types of jacketed power cables
- Direct burial, aerial and submersible applications
- Physical protection and moisture sealing inline splices installed on shielded power cables having solid dielectric insulation as follows: polyethylene (high and low density), cross-linked polyethylene (XLP) and ethylene propylene rubber (EPR)
Typical Properties
| Applications | Cable Connection |
| Brands | 3M™ |
| Cable Insulation Outside Diameter Range | 0.91-1.06 in |
| Cable Insulation Outside Diameter Range (metric) | 23.0-26.8 mm |
| Cable Shielding | Jacketed Concentric Neutral (JCN) |
| Cable Type | Jacketed Concentric Neutral (JCN), Concentric Neutral (CN) |
| Conductor Sizes (Imperial) | 1 AWG (Solid), 1 AWG (Stranded), 2 AWG (Stranded), 1/0 AWG (Solid), 1/0 AWG (Stranded), 2/0 AWG (Stranded) |
| Conductor Sizes (Metric) | 35 mm² (Stranded), 50 mm² (Solid), 50 mm² (Stranded), 70 mm² (Stranded) |
| Connector Included | None |
| Dielectric Strength (V/mil) | 490 V/mil |
| Elongation | 635 % |
| For Use With | 3M™ 5400 Series Cold Shrink Splices |
| Insulation Outer Diameter (Imperial) | 0.91 in, 0.92 in, 0.93 in, 0.94 in, 0.95 in, 0.96 in, 0.97 in, 0.98 in, 0.99 in, 1 in, 1.01 in, 1.02 in, 1.03 in, 1.04 in, 1.05 in, 1.06 in |
| Insulation Outer Diameter (metric) | 23.114 mm, 23.368 mm, 23.622 mm, 23.876 mm, 24.13 mm, 24.384 mm, 24.638 mm, 24.892 mm, 25.146 mm, 25.4 mm, 25.654 mm, 25.908 mm, 26.162 mm, 26.416 mm, 26.67 mm, 26.924 mm |
| Lug/Stem Connector Included in Kit | No |
| Maximum Cable Jacket Opening | 28 Inch |
| Maximum Conductor Size (Imperial) | 1 AWG |
| Maximum Conductor Size (Metric) | 50 mm² |
| Maximum Splice O.D. | 3.3 Inch |
| Maximum Splice Outside Diameter | 3.3 in |
| Minimum Cable Jacket O.D. | 1.15 in |
| Number of Conductors | 1 |
| Product Colour | Black |
| Product Series | 5450 Series |
| Splice Type | Inline |
| Units per Case | 6.0 |
| Voltage | 15 kV, 35 kV, 25/28 kV |
| Voltage Application | Medium Voltage |
Resources
Safety Data Sheets
Document Number: MSDS_3484458_CA_EN
(PDF)
