3M™ 3/C Low Voltage Splice Kit 5730, 1 kV, 1/Case
- 3M ID 7000134400
- UPC 50051141046254
Details
Highlights
- Designed for use with armor power cable
- Used for indoor and outdoor installations
- Perfect for use in aerial, direct-burial and submersible applications
- Rated for up to 1 kV applications
- Includes 1 PST jacket tube, constant force springs, shielding tape 24 strips and 1 copper shielding sleeve
- CSA Certified and RoHS 2011/65/EU Compliant
3M™ Cold Shrink Inline Splice Kits 5730 Series are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications.
Each 3M™ Cold Shrink Inline Splice Kits 5730 Series requires at least 1 roll of 3M™ Sheath Wrap. For use with 3/C or 4/C Armor Power Cable (Teck-90) up to 1000 V. 3M™ 3/C Armored Power Cable 5730 Series accommodates a full range of cable sizes from 14 AWG–750 kcmil. The overall jacket diameter ranges from 16–102 mm (0.62–4.00” ). Notes: Connectors are not included in the kit. Use only CSA certified compression connectors. Vinyl or nylon butt connectors are preferred for 5730 and 5731 series. Amount of Sheath Wrap needed is based on two half-lapped layers and 4.57 m (15’) rolls
Suggested applications
- Protecting against moisture and contamination
- Direct Burial, Aerial, and Submersible permanent installations
Typical Properties
Resources
Similar products
Current product  3M™ 3/C Low Voltage Splice Kit 5730, 1 kV, 1/Case | ||
|---|---|---|
| Brands | 3M | |
| Cable Size Range | 14-10 AWG | |
| Conductor Type | Aluminum or Copper | |
| Insulation Outside Diameter Range | 0.63-0.98 in | |
| Insulation Outside Diameter Range (metric) | 16 - 25 mm | |
| Maximum Operating Voltage | 1000 Volt | |
| Number of Conductors | 3 | |
| Product Type | Splice Kit | |
| Splice Type | Inline | |
| Units per Case | 1.0 |
3M™ Cold Shrink Quick Insulators QI SeriesLegal disclaimer
