3M™ Rejacketing Sleeve, RJS-4-4FT, three 4 ft (1.2 m) coils, 3.3-35 kV
- 3M ID 7000134299
- UPC 50051141039379
Details
Highlights
- Installs quickly and accommodates a wide range of cable sizes
- No torches, heat or special tools required
- Seals tight and retains resiliency and pressure
- Excellent resistance to ozone and ultra-violet radiation
- Easy to adjust sleeve length
- Good solvent resistance
- Pre-cut into three pieces
- Designed to be used in conjunction with 3M™ Cold Shrink Breakout Boots and 3M™ Silicone Rubber Terminations
3M™ Rejacketing Sleeves RJS Series are designed so that 3M™ Cold Shrink QT-III and Q-TIII Silicone Rubber Terminations can be used on 3/C (three conductor) medium voltage shielded power cables of tape shield, wire shield, armoured and non-armoured configurations. Rejacketing sleeves are designed to protect the phase legs (core) of 3/C shielded power cable from exposure to moisture, corrosion, ozone, ultra-violet radiation, physical contact and other hazards that are associated with termination operating environments. Rejacketing sleeves are designed to be used in conjunction with 3M™ Cold Shrink Breakout Boots and Silicone Rubber Terminations. The 3M™ Rejacketing Sleeve RJS-4 has a metallic shield diameter range of 1.02-1.28 inch(25.9-32.4 mm), a voltage range of 3.3-35.0 kV, and three 4-foot (1.2 m) lengths per case.
3M™ Rejacketing Sleeves RJS Series are designed so that 3M™ Cold Shrink QT-III & Q-TIII Silicone Rubber Terminations can be used on 3/C (three conductor) medium voltage shielded power cables of tape shield, wire shield, armoured and non-armoured configurations. Rejacketing sleeves are designed to protect the phase legs (core) of 3/C shielded power cable from exposure to moisture, corrosion, ozone, ultra-violet radiation, physical contact and other hazards that are associated with termination operating environments. Rejacketing sleeves are designed to be used in conjunction with 3M™ Cold Shrink Breakout Boots and Silicone Rubber Terminations.
Suggested applications
- Protect shielded phase legs (cores) of 3/C medium voltage (35 kV and less) power cables after the jacket has been removed in preparation for terminating
- Are used to protect shielded phase legs (cores) of 3/C medium voltage (35 kV and less) power cables after the jacket has been removed in preparation for terminating
Typical Properties
| Brands | 3M™ |
| Dielectric Strength (V/mil) | 428 V/mil |
| Elongation | 910 % |
| Metallic Shield Diameter Range | 1.02-1.28 in |
| Operating Temperature (Celsius) | 105 |
| Operating Temperature (Fahrenheit) | 194 |
| Product Colour | Dark Grey |
| Product Type | Splice Jacketing and Rejacketing Kits |
| Temperature Rating | 356°F (180°C) Class H |
| Tensile Strength (Imperial) | 1058 Pound-Force Per Square Inch |
| Units per Case | 3.0 |
| Voltage Range | 3.3 - 35 kV |
| Overall Length (Imperial) | 4 ft |
| Overall Length (Metric) | 1.22 m |
