3M™ Heat Shrink Flexible Polyolefin Tubing, EPS-200, black, 1/2 in x 48 in (1.27 cm x 121.92 cm)
- 3M ID 7000133600
Details
Highlights
- 2:1 shrink ratio
- When freely recovered, the tubing will shrink to 50% of its original diameter
- Rated for operation at –55°C (–67°F) to 110°C (230°F)
- Adhesive reflow will occur at temperatures above 80°C (176°F)
- Withstands temperatures of -67 to 230 degrees F (-55 to 110 degrees C)
- Flame-retardant tubing is rated for 600V applications
3M™ Heat Shrink Flexible Polyolefin Tubing EPS-200 is 2:1 thin-wall tubing that helps provide convenient protection of electronic components, wire splices or bundling of wires.
3M™ Heat Shrink Flexible Polyolefin Tubing EPS-200 is thin-wall tubing that offers the advantages of integral adhesive-lined construction. The tubing is made from a flame-retardant, flexible polyolefin with a thin layer of special thermoplastic adhesive. The heat-shrinkable outer wall is selectively cross-linked while maintaining the high flow and excellent adhesion of the inner sealant liner. When heated in excess of 121°C (250°F), 3M™ Heat Shrink Flexible Polyolefin Tubing EPS-200 rapidly shrinks to a skin-tight fit, forcing the melted adhesive lining to flow and cover the substrate. The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. Upon cooling, the adhesive solidifies forming a permanent, non-drying, flexible and water-resistant barrier. The tubing is UL Recognized (file E-39100) and meets the specifications of AMS-DTL-23053/4, Class 2.
Suggested applications
- Protection of electronic components, wire splices or bundling of wires
- Automotive, truck and marine wiring splices and connections are protected from harsh environments
Typical Properties
| Brands | 3M™ |
| Dielectric Strength (V/mil) | 500 V/mil |
| Elongation | 450 % |
| Expanded Inner Diameter | 0.5 in |
| Expanded Inner Diameter (metric) | 12.70 mm |
| Flame Retardant | Yes |
| Flammability Rating | UL 224 All Tubing Flame Test [jacket] |
| Inner Diameter After Shrink (Imperial) | 0.195 in |
| Inner Diameter After Shrink (Metric) | 5 mm |
| Inner Diameter Before Shrink (Imperial) | 0.5 in |
| Inner Diameter Before Shrink (Metric) | 12.7 mm |
| Material | Polyolefin |
| Maximum Operating Temperature (Celsius) | 110 °C |
| Maximum Operating Temperature (Fahrenheit) | 230 null |
| Mil Spec | AMS-DTL-23053/4, Class 2 |
| Minimum Expanded Tubing I. D. | 0.5 in |
| Non-Corrosive | Yes |
| Operating Temperature (Celsius) | -55 °C to 110 °C |
| Operating Temperature (Fahrenheit) | -67 °F to 230 °F |
| Operating Temperature Range (Celsius) | -55 °C to 110 °C |
| Operating Temperature Range (Fahrenheit) | -67 °F to 230 °F |
| Recovered Inner Diameter | 0.25 in |
| Recovered Inner Diameter (metric) | 6.35 mm |
| Shrink Ratio | 2:1 |
| Tensile Strength (Imperial) | 2100 Pound-Force Per Square Inch |
| UL File Number | E-39100 |
| Units per Case | 75.0 |
| Overall Length (Imperial) | 48 in |
