3M™ Heat Shrink Thin-Wall Tubing, FP-301, black, 1/8 in x 48 in (0.32 cm x 121.92 cm)
- 3M ID 7000133543
Details
Highlights
- Rated for 135°C (275° F) continuous operation
- Designed to withstand elevated temperatures to 300°C (572°F) for short periods of time
- 2:1 shrink ratio
- Flexible and split resistant
- Rated for 600V applications
- Flame-retardant tubing is rated for 600V applications
3M™ Heat Shrink Thin-Wall Tubing is a heat-shrinkable, flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications.
3M™ Heat Shrink Thin-Wall Tubing is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering. The tubing is split resistant, mechanically tough, easily marked and resists cold flow. This product meets the requirements of SAE-AMS-DTL-23053/5, Class 1, Class 2 (clear) AMS-3636, AMS-3637, is Underwriters Laboratories (UL) Recognized, File E-39100, at 600 volts maximum at 125°C and is CSA Certified, CSA LR38227, at 600 volts maximum at 125°C.
Suggested applications
- Typically used as shrink-fit electrical insulation over cable splices and terminations
- Used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire-resistant covering
Typical Properties
| Agency Approvals | CSA, UL Recognized |
| Brands | 3M™ |
| Elongation | 175 %, 400 % |
| Expanded Inner Diameter | 0.125 in |
| Expanded Inner Diameter (metric) | 3.18 mm |
| Flame Retardant | Yes |
| Flammability Rating | UL 224 All Tubing Flame Test |
| Inner Diameter After Shrink (Imperial) | 0.062 in |
| Inner Diameter After Shrink (Metric) | 1.57 mm |
| Inner Diameter Before Shrink (Imperial) | 0.125 in |
| Inner Diameter Before Shrink (Metric) | 3.18 mm |
| Material | Polyolefin |
| Maximum Operating Temperature (Celsius) | 135 °C |
| Maximum Operating Temperature (Fahrenheit) | 275 null |
| Mil Spec | SAE-AMS-DTL-23053/5, Class 1 |
| Minimum Expanded Tubing I. D. | 0.125 in |
| Minimum Shrink Temperature (Celsius) | 100 °C |
| Non-Corrosive | Yes |
| Operating Temperature (Celsius) | -55 to 135 Degrees Celsius |
| Operating Temperature (Fahrenheit) | -67 °F to 275 °F |
| Operating Temperature Range (Celsius) | -55 °C to +135 °C |
| Operating Temperature Range (Fahrenheit) | -67 °F to 275 °F |
| Product Colour | Black |
| Product Form | 48 in (1.22 m) sticks with header label |
| Recovered Inner Diameter | 0.062 in |
| Recovered Inner Diameter (metric) | 1.57 mm |
| Shrink Ratio | 2:1 |
| Size (metric) | 3.18 mm |
| Solution for | Access Network: FTTH/FTTB/CATV, Wireless Network: Backhaul, Wireless Network: Infrastructure Accessories, Longhaul/Metro Loop Network: Outdoor, Access Network: xDSL |
| Tensile Strength (Imperial) | 2400 Pound-Force Per Square Inch |
| Tubing Type | Single Wall (Thin) |
| UL Approval | Yes |
| UL Bug Temperature (Celsius) | 125 Degrees Celsius |
| UL Bug Temperature (Fahrenheit) | 257 Degrees Fahrenheit |
| UL Bug Voltage | 600 Volt |
| UL File Number | E-39100 |
| Units per Case | 25.0 |
| Overall Length (Imperial) | 48 in |
| Overall Length (Metric) | 1.219 m |
