3M™ Scotchlok™ Male Disconnect, MNHU10-250DMIX, heat shrink, nylon insulated
- 3M ID 7000133383
- UPC 00051128588963
Details
Highlights
- Corrosion resistance to water, salt, steam and other related contaminants
- Butted-seam terminal uses yellow pre-insulated, heat shrink tubing and ensures a secure fit while offering reliable performance
- This male disconnect terminal offers excellent holding force
- Improved mechanical performance
- Made of electrolytic copper for good conductivity and has corrosion-resistant tin plating
- Rated 600V for building wire and 1000V for signs, fixtures or luminaires
- Accommodates wire sizes 12 to 10 AWG
- Mates with 0.25 in (0.64 cm) wide female tab
- UL Listed, CSA Certified and RoHS 2011/65/EU Compliant
3M™ Scotchlok™ Male Disconnect is an insulated disconnect which attaches to its mating part by slipping the tongue of the male part over the female tab. This disconnect offers superior holding force while allowing for quick and easy disconnect. Its electrolytic copper construction offers good conductivity and a tin-plated finish resists corrosion. The butted-seam barrel is covered by an adhesive-lined polyolefin tubing to offer moisture-seal protection. It withstands a maximum temperature of 221 degrees F (105 degrees C). 3M™ Scotchlok™ Male Disconnects are UL Recognized and CSA certified.
3M™ Scotchlok™ Heat Shrink Pre-Insulated Electrical Terminals help protect against challenging environments with quality moisture protection. The adhesive-lined heat shrink material, when properly crimped and shrunk, provides a seal resistant to water, salt, steam and other related contaminants. The adhesive-lined heat shrink tubing adheres, when shrunk, to both the connector and the wire insulation helping to provide improved pullout strength and strain relief. The tough heat shrink tubing helps to resist abrasions, scoring, cut-through and helps to prevent the effects of long-term aging. The connectors are colour coded for wire range identification and the transparent tubing allows for visual inspection.
Suggested applications
- Ideal for low voltage connections that need to be disconnected frequently
- Great for protecting electrical connections in challenging environments
Typical Properties
| Barrel Inside Diameter | 0.150 Inch |
| Barrel Style | Butted |
| Brands | Scotchlok™ |
| Connection Width (Imperial) | 0.25 in |
| Connection Width (Metric) | 6.35 mm |
| Diameter (D) | 0.39 Inch |
| Fastener Orientation | Male |
| Insulation Colour | Yellow |
| Insulation Material | Heat Shrink |
| Male Tab Width (W') | 0.250 Inch |
| Material | Plastic |
| Maximum Conductor Size (Imperial) | 10 AWG |
| Maximum Conductor Size (Metric) | 6 mm² |
| Maximum Insulation Outer Diameter (Imperial) | 0.145 in |
| Maximum Insulation Outer Diameter (Metric) | 3.7 mm |
| Maximum Operating Temperature (Celsius) | 105 °C |
| Maximum Operating Temperature (Fahrenheit) | 221 null |
| Maximum Recommended Voltage Rating | 600 V |
| Minimum Conductor Size (Imperial) | 12 AWG |
| Minimum Conductor Size (Metric) | 4 mm² |
| Pad Width | 0.25 in |
| Product Colour | Yellow |
| Terminal Style | Fully Insulated |
| Terminal Type | Disconnect |
| Units per Case | 125.0 |
| Voltage Application | Low Voltage |
| Overall Diameter (Imperial) | 0.39 in |
| Overall Length (Imperial) | 1.2 in |
| Overall Length (Metric) | 30.48 mm |
| Overall Width (Imperial) | 0.47 in |
| Overall Width (Metric) | 11.93 mm |
Legal disclaimer
