3M™ Cold Shrink QT-III, Three Conductor Termination Kit 7600-T-3G is tubular and designed for cables with internal ground wires for indoor installations. The Hi-K stress control design delivers excellent BIL performance and lower surface stress, resulting in a more compact termination.
Each kit contains: One 3M™ Cold Shrink Silicone Rubber Breakout Boot Assembly, one 3M™ Cold Shrink Silicone Rubber Jacket Seal Assembly, three 3M™ Silicone Rubber Phase Rejacketing Sleeve Assemblies, three 3M™ Cold Shrink Silicone Rubber Termination Assemblies, one 3M™ Tinned Copper Ground Braid Assembly, three small 3M™ Constant-Force Springs, one large 3M™ Constant-Force Spring, eight strips of Scotch® Mastic 2230, one 3/4" (19.05 mm) roll of Scotch® Super 33+™ Vinyl Electrical Tape, one 1-1/2" (25.4-12.7 mm) roll Scotch® Vinyl Electrical Tape Super 88, one roll of Scotch® Electrical Shielding Tape 24, one 3M™ Cable Cleaning Preparation Kit CC-2, three 1/2" x 10" (12.7 mm x 254 mm) strips of 3M™ EMI Copper Foil Shielding Tape 1181, and one Instruction Sheet.
Applications | Cable Connection |
BIL | 95 kV |
Brands | 3M™ |
Breakout Boot | Yes |
Cable Insulation Outside Diameter Range | 0.70-0.92 in |
Cable Insulation Outside Diameter Range (metric) | 17.8-23.4 mm |
Cable Shielding | Tape Shield, UniShield®, Wire-Over-Tape Shield, Wire Shield |
Case Quantity | 1 |
Conductor Material | Aluminum, Copper |
Conductor Sizes (Imperial) | 3/0 AWG, 4/0 AWG, 250 kcmil, 300 kcmil, 350 kcmil, 500 kcmil, 750 kcmil, 1000 kcmil |
Connector Included | None |
Indoor/Outdoor | Indoor Non-skirted |
Insulation Level | 100%, 133% |
Insulation Outer Diameter (Imperial) | 0.7 in, 0.71 in, 0.72 in, 0.73 in, 0.74 in, 0.75 in, 0.76 in, 0.77 in, 0.78 in, 0.79 in, 0.8 in, 0.81 in, 0.82 in, 0.83 in, 0.84 in, 0.85 in, 0.86 in, 0.87 in, 0.88 in, 0.89 in, 0.9 in, 0.91 in, 0.92 in |
Insulation Outer Diameter (metric) | 17.78 mm, 18.034 mm, 18.288 mm, 18.542 mm, 18.796 mm, 19.05 mm, 19.304 mm, 19.558 mm, 19.812 mm, 20.066 mm, 20.32 mm, 20.574 mm, 20.828 mm, 21.082 mm, 21.336 mm, 21.59 mm, 21.844 mm, 22.098 mm, 22.352 mm, 22.606 mm, 22.86 mm, 23.114 mm, 23.368 mm |
Insulation Outside Diameter Range | 1.08 - 1.70 Inch |
Insulation Outside Diameter Range (metric) | 27.4 - 43.2 mm |
Insulation Rejacketing | Yes |
Lug/Stem Connector Included in Kit | No |
Maximum Cable Outside Diameter | 3.30 in |
Maximum Cable Outside Diameter (Metric) | 83.8 mm |
Maximum Conductor Size (Imperial) | 1000 kcmil |
Maximum Conductor Size (Metric) | 500 mm² |
Maximum Installed Length | 8.50 in |
Minimum Conductor Size (Imperial) | 500 kcmil |
Minimum Conductor Size (Metric) | 240 mm² |
Number of Conductors | 3 |
Product Series | 7600-T-3G |
Product Type | Splice |
Splice Type | Inline |
Suitable for High Voltage | No |
Typical Splice Length | 32 in |
Typical Splice Length (metric) | 813 mm |
Units per Case | 1.0 |
Voltage | 5 kV, 8 kV, 15 kV, 25 kV, 35 kV |
Voltage Application | Medium Voltage |
Safety Data Sheets
Document Number: MSDS_2654440_CA_EN
(PDF)