3M™ Motor Lead Pigtail Splice Kit 5382, 5-8 kV, Shielded and Non-Shielded, 2-1/0 AWG (Feeder), 4-1/0 AWG (Motor Lead), 3 Splices/Kit
- 3M ID 7000133144
- UPC 00051128559529
Details
Highlights
- Fast and simple installation
- No torches or heat source required
- Easy re-entry
- Thick walls to resist puncture and abrasion damage
- BIL rating is 150 kV, which exceeds the normal 110 kV BIL rating for a 15 kV voltage class
- Silicone Rubber Splice Bodies provide excellent high and low temperature performance and flexibility
- Special electrode design minimizes electrical stress at critical cable/splice interface
The 3M™ Motor Lead Splicing Kits 5380 are a series of kits designed for splicing motor lead cables to incoming feeder cables. These kits can accommodate pigtail (stub) connections, 5/8 kV shielded and non-shielded feeders.
The 3M™ Motor Lead Pigtail Splice Kit contains all the necessary materials (except lugs, which are sold separately) needed to make three splices: Three 3M™ Lug Covers, three 3M™ Cold Shrink Terminations, twelve 3M™ Mastic Sealing Strips, three 3M™ Copper Tape Strips, three 3M™ Cleaning Kits, six 3M™ Tubes Silicone Grease, three 3M™ Cold Shrink Jacket Tubes, three 3M™ Constant Force Springs, three 3M™ Cable Ties, three 3M™ Ground Straps and one Instruction Sheet.
Suggested applications
- Designed for splicing motor lead cables to incoming feeder cables
- Can accommodate pigtail (stub) connections, 5/8 kV shielded and non-shielded feeders
Typical Properties
| Applications | Cable Connection |
| Brands | 3M™ |
| Cable Shielding | Ribbon Shield, Jacketed Concentric Neutral (JCN), Wire Shield, Concentric Neutral (CN), Non-shielded, UniShield® |
| Cable Type | Jacketed Concentric Neutral (JCN), Concentric Neutral (CN) |
| Conductor Material | Copper, Aluminum |
| Conductor Sizes (Imperial) | 250 kcmil, 350 kcmil, 500 kcmil |
| Connection Type | Pigtail (Shielded), Pigtail (Non-shielded) |
| Connector Included | None, No |
| Inner Diameter of Boot to Size of Cables | 1.16 in |
| Inner Diameter of Boot to Size of Cables (metric) | 29.5 mm |
| Insulation Outside Diameter | 0.43-0.65 Inch |
| Insulation Outside Diameter Range | 0.43-0.65 in |
| Insulation Outside Diameter Range (metric) | 10.9-16.5 mm |
| Maximum Bolt Length | 3/4 in |
| Maximum Bolt Length (metric) | 19.1 mm |
| Maximum Conductor Size (Imperial) | 500 kcmil |
| Maximum Conductor Size (Metric) | 240 mm² |
| Maximum Feeder Lead Size | 1/0 AWG |
| Maximum Lug Length | 2-3/4 in |
| Maximum Lug Length (metric) | 69.9 mm |
| Maximum Motor Lead Size | 1/0 AWG |
| Maximum Operating Voltage | 8 kV |
| Minimum Conductor Size (Imperial) | 250 kcmil |
| Minimum Conductor Size (Metric) | 120 mm² |
| Number of Conductors | 1 , 3 |
| Product Type | Splice |
| Range Feeder Cable (AWG & kcmil) | 2-0 |
| Splice Type | Pigtail or V-stub |
| Typical Splice Length | 33 in |
| Typical Splice Length (metric) | 838 mm |
| Units per Case | 3.0 |
| Voltage | 5 kV - 8 kV |
| Voltage Application | Medium Voltage |
Resources
Safety Data Sheets
Document Number: MSDS_2679363_CA_EN
(PDF)
