3M™ Medium Wall Polyolefin Tubing MDT-1100, Flame Retardant, black, 2-2/0AWG (35 - 60 mm2), Expanded/Recovered I.D. 1.10 / 0.37 in (27,9 / 9,4 mm), 48 in (1219mm) length
- 3M ID 7000132418
Details
Highlights
- Easy installation
- Provides excellent abrasion, corrosion and chemical resistance
- Bonds to underlying surfaces and fills small voids that might be present
- Sealant forms a barrier against water, moisture, dirt and other environmental contaminants
- Thermoplastic material remains flexible over long periods of time under adverse environmental conditions
3M™ Heat Shrinkable Medium Wall Cable Sleeves MDT are reliable, tough performers made of split-resistant, cross-linked polyolefin. They are flame-retardant and provide excellent abrasion, corrosion and chemical resistance. 3M™ Heat Shrinkable Medium Wall Cable Sleeves MDT help protect against mechanical and environmental dangers. These cable sleeves come in a length of 48 inches (121.9 cm).
3M™ Heat Shrinkable Medium Wall Cable Sleeves MDT have greater flexibility than 3M™ Heat Shrinkable Cable Sleeves HDT. Installation of these fast-shrinking sleeves is easy and requires minimal training. The 48 inch (121.9 cm) lengths are unprinted and come standard with a factory-applied adhesive/sealant. This sealant is a heat-activated thermoplastic material that remains soft and flexible over long periods under adverse environmental conditions. Order in the size equivalent to expanded inside diameter required.
Suggested applications
- Helps protect against mechanical and environmental dangers
- Has shrink ratios to accommodate effective insulating and sealing over large transitions, splices and battery cables
- Larger shrink ratios can effectively insulate and seal over large transitions, splices and battery cables
Typical Properties
| Adhesive Lined | Yes |
| Adhesive Material | Hot melt adhesive layer |
| Application Specifications | SAE-AMS-DTL-23053/15, Class 2 |
| Brands | 3M™ |
| Cable Size Range | 2-2/0 AWG |
| Chemical Resistant | Yes |
| Dielectric Strength (V/mil) | 200 |
| Elongation | 4.75 % |
| Expanded Inner Diameter | 1.1 in |
| Expanded Inner Diameter (metric) | 27.9 mm |
| Flame Retardant | Yes |
| Flammability Rating | Self-Extinguishing |
| Inner Diameter After Shrink (Imperial) | 0.37 in |
| Inner Diameter After Shrink (Metric) | 9.4 mm |
| Inner Diameter Before Shrink (Imperial) | 1.1 in |
| Inner Diameter Before Shrink (Metric) | 27.9 mm |
| Material | Polyolefin |
| Maximum Operating Temperature (Celsius) | 110 °C |
| Maximum Operating Temperature (Fahrenheit) | 230 null |
| Minimum Expanded Tubing I. D. | 1.1 in |
| Minimum Shrink Temperature (Celsius) | 121 °C |
| Minimum Shrink Temperature (Fahrenheit) | 250 °F |
| Operating Temperature (Celsius) | -55 to 100 Degrees Celsius |
| Operating Temperature (Fahrenheit) | -67 °F to 230 °F |
| Operating Temperature Range (Celsius) | -55 °C to +105 °C |
| Operating Temperature Range (Fahrenheit) | -67 °F to 230 °F |
| Product Colour | Black |
| Product Form | Sleeve-roll |
| Product Type | Heat Shrink MDT |
| Recovered Inner Diameter | 0.37 in |
| Recovered Inner Diameter (metric) | 9.4 mm |
| Shrink Ratio | 3:1 |
| Solution for | Access Network: xDSL, Longhaul/Metro Loop Network: Outdoor, Wireless Network: Infrastructure Accessories, Access Network: FTTH/FTTB/CATV, Wireless Network: Backhaul |
| Tensile Strength (Imperial) | 2400 Pound-Force Per Square Inch |
| Tubing Type | Medium Wall |
| Units per Case | 20.0 |
| Voltage Rating | 1 kV |
| Overall Length (Imperial) | 48 in |
| Overall Length (Metric) | 1.22 m |
