3M™ Heat Shrink Heavy-Wall Cable Sleeve for 1 kV ITCSN-2000-12-Bulk, 250-750 kcmil, expanded/recovered I.D. 2.00/0.65 in, 12 in (30.48 cm) length
- 3M ID 7000132162
Details
Highlights
- Composed of cross-linked polyolefin
- Split resistant and fast shrinking
- Factory-applied adhesive/sealant
- Cut-to-length sleeves
- 4:1 shrink ratio
- CERTIFICATIONS: UL Listed, CSA Certified, and RoHS 2011/65/EU Compliant
3M™ Heat Shrink Heavy-Wall Cable Sleeve ITCSN are designed to provide reliable performance for electrical splices, connections and terminations, as well as mechanical and environmental protection. Fabricated from cross-linked polyolefin, this tubing is highly split-resistant and fast-shrinking to provide rapid installation.
3M™ Heat Shrink Cable Sleeve ITCSN is a split resistant sleeve with a factory applied adhesive/sealant that offers reliable performance for electrical splices, connections and terminations. It is perfect for insulating secondary splices, direct buried, submersible or dig in repairs, as well as physical protection of high voltage, air insulated connectors or lugs. It withstands temperatures of 67 to 230 degrees F ( 55 to 110 degrees C). UL Listed, CSA Certified and RoHS 2011/65/EU Compliant.
Suggested applications
- Use to ensure the reliable performance of electrical splices, connections and terminations
- Designed to provide mechanical and environmental protection
- Can be direct buried or submersible
Typical Properties
| Adhesive Lined | Yes |
| Adhesive Material | Hot melt adhesive layer, Hot-melt adhesive |
| Agency Approvals | CSA, UL 486D |
| Brands | 3M™ |
| Cable Size Range | 250-750 kcmil |
| Case Quantity | 50 |
| Chemical Resistant | Yes |
| Dielectric Strength | 500 V/mil |
| Dielectric Strength (V/mil) | 500 V/mil |
| Direct Bury | Yes |
| Elongation | 4.75 % |
| Expanded Inner Diameter | 2 in |
| Expanded Inner Diameter (metric) | 50.8 mm |
| Flame Retardant | No |
| Flammability Rating | Non-Flame Retardant |
| Inner Diameter After Shrink (Imperial) | 0.65 in |
| Inner Diameter After Shrink (Metric) | 1.651 cm² |
| Inner Diameter Before Shrink (Imperial) | 2 in |
| Inner Diameter Before Shrink (Metric) | 5.08 cm² |
| Material | Adhesive-lined Polyolefin |
| Maximum Operating Temperature (Celsius) | 100 °C |
| Maximum Operating Temperature (Fahrenheit) | 230 null |
| Maximum Voltage Rating | 1 kV |
| Minimum Expanded Tubing I. D. | 2 in |
| Minimum Shrink Temperature (Celsius) | 121 °C |
| Minimum Shrink Temperature (Fahrenheit) | 250 °F |
| Non-Corrosive | Yes |
| Operating Temperature (Celsius) | -55 to 100 Degrees Celsius |
| Operating Temperature (Fahrenheit) | -67 °F to 230 °F |
| Operating Temperature Range (Celsius) | -55 °C to -100 °C |
| Operating Temperature Range (Fahrenheit) | -67 °F to 230 °F |
| Product Colour | Black |
| Product Type | Splice |
| Recovered Inner Diameter | 0.65 in |
| Recovered Inner Diameter (metric) | 16.5 mm |
| Shrink Ratio | 3:1 |
| Solution for | Longhaul/Metro Loop Network: Outdoor, Access Network: FTTH/FTTB/CATV, Access Network: xDSL, Wireless Network: Backhaul |
| Splice Type | Heat Shrink |
| Tensile Strength (Imperial) | 2400 Pound-Force Per Square Inch |
| Tubing Type | Heavy Wall |
| Units per Case | 50.0 |
| Voltage | 1 kV |
| Voltage Rating | UL Rated to 600 V (Shall not exceed 1 kV) |
| Overall Length (Imperial) | 12 in |
| Overall Length (Metric) | 304.8 mm |
