3M™ Low Mist Contact Adhesive, Green, 5 gal (18.92 l) (Pail), 1 Can/Drum
- Part Number 30LM-5GAL-GRN
- 3M ID 7000121385
Details
Highlights
- Long bonding range with high immediate bond strength
- Post-formable, heat resistant and non-flammable in the wet state
- Low mist formula reduces waste and improves coverage over standard sprays
- Creates a very high strength, heat resistant bond
- Adhesive can be applied by spray, brush or rolled to help improve efficiency in application
The 3M™ Fastbond™ Contact Adhesive is a water dispersed, sprayable contact adhesive with high immediate bond strength and a long bonding range.
The 3M™ Fastbond™ Contact Adhesive is non-flammable in the wet state, post formable and heat resistant. It is the thickened version of 3M™ Fastbond™ Contact Adhesive 30 NF. It bonds most foamed plastics, plastic laminate, wood plywood veneer, and canvas to themselves and to each other.
Suggested applications
- Bonds most foamed plastics, plastic laminate, wood plywood veneer, and canvas to themselves and to each other
Typical Properties
| Application Method | Brush, Spray, Roll |
| Applications | Floor Bonding, Seat Assembly |
| Brands | Fastbond™ |
| Container Size (Imperial) | 5 Gallon |
| Container Size (Metric) | 18.9 L |
| Environmental Considerations | California Air Resources Board, SCAQMD, GREENGUARD® Certified, Helps contribute to LEED® credits, Low VOC, Ozone Transport Commission |
| Flame Retardant | Non-flammable |
| Heat Resistance Temperature (Celsius) | <148 °C |
| Heat Resistance Temperature (Fahrenheit) | <300 °F |
| Industries | General Industrial |
| Open Time | 30 min - 4 hr |
| Physical Form | Medium liquid |
| Product Colour | Green |
| Product Form | Bulk |
| Smallest Saleable Unit | Canister |
| Solids Weight Percent (Approximate) | 42.4 % - 50 % |
| Storage Temperature (Celsius) | 16°C - 27°C |
| Storage Temperature (Fahrenheit) | 60 °F - 80 °F |
| Substrate | Paper, Cardboard, Fibrous Glass, Glass, Ceramic, Leather, Hardwood, Wood, Flexible Foam (Latex, Urethane), Plastic (Flexible Vinyl), Rigid Foam (Urethane), Plastic (High Performance Nylon), Rigid Foam (Beadboard Styrene), Plastic (Polyolefins and Thermoplastic Elastomers), Plastic (ABS, PVC, Acrylic), Metal, Rubber (Except EPDM), Fabric, Felt, Cork |
| Units per Case | 1.0 |
Resources
Safety Data Sheets
Document Number: MSDS_0722561_CA_EN
(PDF)
