Scotch-Brite™ EX2 Deburring Wheel, X2-WL, MED, 6 in x 1/2 in x 1 in (15.24 cm x 1.27 cm x 2.54 cm)
- 3M ID 7000120914
- UPC 00048011172156
Details
Highlights
- Tough, layered, unitized construction can operate clockwise or counterclockwise directions
- Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications
- Tough aluminum oxide abrasive achieves an aggressive cut
- Open web construction inimizes heat build up to lessen impact on heat-sensitive materials
- Resists smearing for cleaner surfaces and less preparation
- Tough, layered, unitized construction can operate clockwise or counterclockwise directions
The Scotch-Brite™ EX2 Deburring Wheel is a convolute-constructed wheel that provides mid-range aggressiveness and hardness for deburring, edge radius, blending, polishing, and finishing. This wheel performs best when consistently presented with a sharp edge or metal burrs, helping to ensure a proper finish. Equip yourself with the consistent power of the Scotch-Brite™ EX2 Deburring Wheel.
The combination of mineral (aggressiveness) and density (hardness) make the Scotch-Brite™ EX2 Deburring Wheel uniquely suited to applications where a moderate degree of conformability, wheel hardness, and edge retention are needed. A unique resin system helps minimize smearing and reduces heat build-up, and the wheel's open web construction helps the wheel run cool and resist loading, which keeps the abrasive minerals cutting at a high-performance rate by limiting clogged fibres.
Suggested applications
- Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites
Typical Properties
| Abrasive Material | Aluminum Oxide |
| Applications | Deburring, Finishing, Polishing |
| Attachment Type | Centre Hole |
| Brands | Scotch-Brite™ |
| Centre Hole Diameter (Imperial) | 1 in |
| Centre Hole Diameter (Metric) | 25.4 mm |
| Density | 8 |
| Equipment - Machines | Inline Sanders, Manual Backstand |
| Face Width (Imperial) | 0.5 in |
| Face Width (Metric) | 12.7 mm |
| For Use On | Composites, Glass |
| Grade | Medium |
| Industries | Marine, Metalworking |
| Maximum Speed | 6000 rpm |
| Product Form | Wheel |
| Sub Applications | Blending, Flat Finishing |
| Sub Industries | Turbine Engines, Plumbing Fixtures, Builders Hardware, Metal Implants, Metal Fabrication, Medical Instruments |
| Overall Diameter (Imperial) | 6 in |
| Overall Diameter (Metric) | 152.4 mm |
Resources
Safety Data Sheets
Document Number: MSDS_1974161_CA_EN
(PDF)
Related products
