3M™ Cold Shrink QT-II Silicone Rubber Termination Kit 5671, 1/Kit
- 3M ID 7000057819
- UPC 00054007337980
Details
Highlights
- Track-resistant silicone rubber insulators with built-in Hi-K stress relief
- Easy installation;insulators are pre-stretched around a spiral-wound, plastic core
- Void-free, flexible seal without special tools or torches
- Specially-formulated, high-impulse, Hi-K material
- Compatible with polyethylene, cross-linked polyethylene (XLP) and ethylene propylene rubber (EPR) cables
- Each kit includes all the materials necessary to make 1 termination are included (except lug)
- Meets IEEE Standard 48 Class 3 for indoor, weather-protected applications
3M™ Cold Shrink QT-II Silicone Rubber Termination Kits QT-II 5670 Series will terminate CN or JCN cables and can be used for both indoor (protected) and outdoor (weather-exposed) applications.
Each 3M™ Cold Shrink QT-II Silicone Rubber Termination Kit QT-II 5670 Series includes one each of: Hi-K silicone rubber termination, Silicone rubber terminator, Packet of silicone grease and Instruction sheet
Suggested applications
- For terminating Concentric Neutral (CN) or Jacketed Concentric Neutral (JCN) cables
- Lightweight for either free-hanging or bracket-mounting arrangements
- Upright or inverted installations
Typical Properties
| Applications | Cable Termination |
| BIL | 110 kV |
| Brands | 3M™ |
| Breakout Boot | No |
| Cable Insulation Outside Diameter Range | 0.64 to 1.12 in |
| Cable Insulation Outside Diameter Range (metric) | 16.2-28.4 mm |
| Cable Shielding | Concentric Neutral (CN), Jacketed Concentric Neutral (JCN) |
| Cable Type | Polymeric insulated, copper wire screened, unarmored cable |
| Case Quantity | 10 |
| Conductor Sizes (Imperial) | 1 AWG, 2 AWG, 1/0 AWG, 2/0 AWG, 3/0 AWG, 4/0 AWG, 250 kcmil |
| Indoor/Outdoor | Indoor Non-skirted |
| Insulation Level | 100%, 133% |
| Insulation O.D. Range (Metric) | 16.2-28.4 mm |
| Insulation Outer Diameter (Imperial) | 0.64 in, 0.65 in, 0.66 in, 0.67 in, 0.68 in, 0.69 in, 0.7 in, 0.71 in, 0.72 in, 0.73 in, 0.74 in, 0.75 in, 0.76 in, 0.77 in, 0.78 in, 0.79 in, 0.8 in, 0.81 in, 0.82 in, 0.83 in, 0.84 in, 0.85 in, 0.86 in, 0.87 in, 0.88 in, 0.89 in, 0.9 in, 0.91 in, 0.92 in, 0.93 in, 0.94 in, 0.95 in, 0.96 in, 0.97 in, 0.98 in, 0.99 in, 1 in, 1.01 in, 1.02 in, 1.03 in, 1.04 in, 1.05 in, 1.06 in, 1.07 in, 1.08 in, 1.09 in, 1.1 in, 1.11 in, 1.12 in |
| Insulation Outer Diameter (metric) | 16.256 mm, 16.51 mm, 16.764 mm, 17.018 mm, 17.272 mm, 17.526 mm, 17.78 mm, 18.034 mm, 18.288 mm, 18.542 mm, 18.796 mm, 19.05 mm, 19.304 mm, 19.558 mm, 19.812 mm, 20.066 mm, 20.32 mm, 20.574 mm, 20.828 mm, 21.082 mm, 21.336 mm, 21.59 mm, 21.844 mm, 22.098 mm, 22.352 mm, 22.606 mm, 22.86 mm, 23.114 mm, 23.368 mm, 23.622 mm, 23.876 mm, 24.13 mm, 24.384 mm, 24.638 mm, 24.892 mm, 25.146 mm, 25.4 mm, 25.654 mm, 25.908 mm, 26.162 mm, 26.416 mm, 26.67 mm, 26.924 mm, 27.178 mm, 27.432 mm, 27.686 mm, 27.94 mm, 28.194 mm, 28.448 mm |
| Insulation Rejacketing | No |
| Lug/Stem Connector Included in Kit | No |
| Material | Silicone Rubber |
| Maximum Conductor Size (Imperial) | 500 kcmil |
| Maximum Conductor Size (Metric) | 240 mm² |
| Maximum Installed Length | 6.25 in |
| Minimum Conductor Size (Imperial) | 2/0 AWG |
| Minimum Conductor Size (Metric) | 70 mm² |
| Number of Conductors | 1 |
| Product Colour | Grey |
| Product Series | 5670 |
| Voltage | 15 kV |
| Voltage Rating | 6/10 kV |
Resources
Safety Data Sheets
Document Number: MSDS_2632586_CA_EN
(PDF)
