3M™ Cushion-Mount™ Plus Plate Mounting Tape E1715H, Teal, 18 in x 25 yd (457 mm x 22.86 m), 15 mil (0.4 mm), 1 Roll/Case
- 3M ID 7000047425
- UPC 00051125748063
Details
Highlights
- 0.015 inch (0.38 mm) double coated foam tape has an air release feature with plate side adhesive technology designed to resist edge lifting on flexographic print plates
- Has a medium firm density foam that is ideal for printing combinations of solids and process with halftone dots
- Teal foam colour indicates the medium firm density foam
- Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
- Has higher plate side adhesion for challenging print conditions that use thick plates or small print sleeves
- Print plates mounted will have no air bubbles under the plate due to the air release feature designed into the tape
The 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1715H with easy mount adhesive is designed for mounting flexographic print plates to cylinders or sleeves. This teal foam mounting tape provides high quality medium firm combination print.
The 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1715H is a teal foam tape that provides high quality combination print. This is the medium firm tape for combination print. It has an air release feature that allows for virtually bubble free mounting. This tape has excellent resistance to lifting on press allowing for clean plate removal.
Suggested applications
- Mounting photopolymer plates to flexographic printing cylinders and sleeves
- Used in combination, process, and solid printing processes
Typical Properties
