3M™ Cold Shrink QT-II Termination Kit 5635K, 3/Kit
- 3M ID 7000031453
Details
Highlights
- Track-resistant silicone rubber insulators with built-in Hi-K stress relief
- Easy installation;insulators are pre-stretched around a spiral-wound, plastic core
- Void-free, flexible seal without special tools or torches
- Each kit includes all the materials necessary to make 3 terminations are included (except lugs)
- Conductor Size Ranges: · 5 kV (100%): 8-2/0 AWG · 5 kV (133%): 8-1/0 AWG · 8 kV (100%): 8-1/0 AWG · 8 kV (133%): 8-1 AWG · 15 kV (100%): 8-4 AWG · 15 kV (133%): 8-6 AWG
- Withstands voltages of 5 to 15kV and is 110 kV BIL-rated
- Includes three 4-skirt, 1-piece, cold shrink terminations
- Meets IEEE Standard 48, Class 1 for outdoor, weather-exposed applications
3M™ Cold Shrink QT-II Termination Kits provide easy installation for a broad spectrum of indoor and outdoor applications. When the terminator is slipped over a properly prepared cable and the core is removed, the terminator immediately shrinks to the cable's dimensions. The result is a void-free, flexible seal without special tools or torches.
Each 3M™ Cold Shrink QT-II Termination Kit includes: Three 3M™ Hi–K Silicone Rubber Terminations, three 3M™ Mechanical Ground Strap Assemblies, three 3M™ Sealing Mastic Strips, one roll of Scotch® 13 Semi-Conducting Tape, one roll of Scotch® 70 Silicone Rubber Tape, three packs of 3M™ Silicone Grease, one Scotch® Cable Preparation Kit and 1 Instruction Sheet.
Suggested applications
- For terminating tape, wire, and Unishield® shielded cable
- Lightweight for either free-hanging or bracket-mounting arrangements
Typical Properties
| Applications | Cable Termination |
| BIL | 110 kV |
| Brands | 3M™ |
| Breakout Boot | No |
| Cable Insulation Outside Diameter Range | 0.84-1.33 in |
| Cable Insulation Outside Diameter Range (metric) | 21.3-33.8 mm |
| Cable Shielding | Tape Shield, UniShield®, Wire Shield, Wire-Over-Tape Shield |
| Case Quantity | 1 |
| Conductor Sizes (Imperial) | 2/0 AWG, 3/0 AWG, 4/0 AWG, 250 kcmil, 300 kcmil, 350 kcmil, 400 kcmil, 500 kcmil, 600 kcmil, 700 kcmil, 750 kcmil |
| Indoor/Outdoor | Outdoor Skirted |
| Insulation Level | 100%, 133% |
| Insulation Outer Diameter (Imperial) | 0.84 in, 0.85 in, 0.86 in, 0.87 in, 0.88 in, 0.89 in, 0.9 in, 0.91 in, 0.92 in, 0.93 in, 0.94 in, 0.95 in, 0.96 in, 0.97 in, 0.98 in, 0.99 in, 1 in, 1.01 in, 1.02 in, 1.03 in, 1.04 in, 1.05 in, 1.06 in, 1.07 in, 1.08 in, 1.09 in, 1.1 in, 1.11 in, 1.12 in, 1.13 in, 1.14 in, 1.15 in, 1.16 in, 1.17 in, 1.18 in, 1.19 in, 1.2 in, 1.21 in, 1.22 in, 1.23 in, 1.24 in, 1.25 in, 1.26 in, 1.27 in, 1.28 in, 1.29 in, 1.3 in, 1.31 in, 1.32 in, 1.33 in |
| Insulation Outer Diameter (metric) | 21.336 mm, 21.59 mm, 21.844 mm, 22.098 mm, 22.352 mm, 22.606 mm, 22.86 mm, 23.114 mm, 23.368 mm, 23.622 mm, 23.876 mm, 24.13 mm, 24.384 mm, 24.638 mm, 24.892 mm, 25.146 mm, 25.4 mm, 25.654 mm, 25.908 mm, 26.162 mm, 26.416 mm, 26.67 mm, 26.924 mm, 27.178 mm, 27.432 mm, 27.686 mm, 27.94 mm, 28.194 mm, 28.448 mm, 28.702 mm, 28.956 mm, 29.21 mm, 29.464 mm, 29.718 mm, 29.972 mm, 30.226 mm, 30.48 mm, 30.734 mm, 30.988 mm, 31.242 mm, 31.496 mm, 31.75 mm, 32.004 mm, 32.258 mm, 32.512 mm, 32.766 mm, 33.02 mm, 33.274 mm, 33.528 mm, 33.782 mm |
| Insulation Rejacketing | No |
| Lug/Stem Connector Included in Kit | No |
| Maximum Installed Length | 12.00 in |
| Number of Conductors | 1 |
| Number of Skirts | 4 |
| Product Colour | Grey |
| Product Series | 5630K |
| Voltage | 5 kV, 8 kV, 15 kV |
Resources
Safety Data Sheets
Document Number: MSDS_2678472_CA_EN
(PDF)
