3M™ Cold Shrink QS-III Splice Kit, 5515A-750-AL, shielded armoured and non-armoured cable, 15 kV, 1.04-1.7 in (26.4-43.2 mm) O.D., 350-750 kcmil
- 3M ID 7000006176
- UPC 00054007421344
Details
Highlights
- Quick and easy installation
- Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
- No heat, flames, or special tools required
- Silicon rubber-splice body provides good high and low temperature performance, and the EPDM rubber jacket offers physical protection
- Rated for 15 kV class cables
- Factory-tested partial discharge and AC ensure reliability
The 3M™ Cold Shrink QS-III Splice Kits 5513A, 5514A, 5515A and 5516A are 15 kV class inline splices for joining tape, longitudinally corrugated (LC) wire and UniShield® shielded power cables. They are a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper or aluminum conductor sizes ranging from 2 AWG to 1000 kcmil (35 to 500 mm2). The cold shrink splice body is a one-piece molded design made of specially formulated silicone rubbers, while the cold shrink jacketing is made of EPDM rubber for physical protection. Each splice manufactured is factory tested to provide reliability.
This kit includes one 3M™ Cold Shrink Silicone Rubber Splice Body, one 3M™ Cold Shrink Adapter Tube, one 3M™ Cold Shrink Jacketing Tube, two 3M™ Red Compound Tubes P55/R, six Scotch® Mastic Sealing Strips 2230, two rolls of Scotch® Rubber Mastic Tape 2228, one 3M™ Cable Cleaning Pad CC-3, one Cable Preparation Template, one Shielding Sleeve, one Ground Strap, five Constant Force Spring Ground Connectors, two Copper Tape Strips, and one Instruction Booklet.
Suggested applications
- For inline splicing, feeder and distribution circuits
- For Tape, Wire, UniShield® & Longitudinally corrugated (LC) shielded cables
- For transitions from shielded to neutral power cables
- For copper or aluminum conductors
- For size transition splicing
- For direct burial installations and submerged locations
- For direct burial installations
- For submerged locations
Typical Properties
| Brands | 3M™ |
| Cable Shielding | Longitudinally Corrugated (LC) |
| Insulation Outside Diameter Range | 1.04 - 1.70 Inch |
| Insulation Outside Diameter Range (metric) | 26.4 - 43.2 mm |
| Product Series | 5515A |
| Splice Type | Cold Shrink |
| Voltage | 15 kV |
Resources
Safety Data Sheets
Document Number: MSDS_2643393_CA_EN
(PDF)
