3M™ Motor Lead Inline Splice Kit 5331, Non-Shielded and Shielded Cables, 5-8 kV, 8-4 AWG (Feeder), 10-4 AWG (Motor Lead), 1/Case

3M™ Motor Lead Inline Splice Kits are designed for splicing motor lead cables to incoming feeder cables. They can accommodate inline connections, 5/8 kV shielded and non-shielded feeders. The splice’s main component, the slip-on splice cover, is made from EPDM rubber. A mastic strip is used for the moisture seal on the inline kits.

3M™ Motor Lead Inline Splice Kits are designed to be used with copper compression, one- or two-hole lugs. After being crimped onto the cables, the lugs are bolted together in an inline configuration, then insulated and sealed with the 3M™ Motor Lead Splicing Kits. Each kit contains all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok™ Copper Compression Lugs 30000 Series or other UL listed copper lugs, can be used. In addition, it requires vinyl tape which can also be purchased separately.