3M™ Motor Lead Pigtail Splice Kit 5322, 5/8 kV, Shielded and Non-Shielded, 2-1/0 AWG (Feeder), 4-1/0 AWG (Motor Lead)

The 3M™ Motor Lead Pigtail Splice Kit makes three splices. Lugs are not included in kits. Feeder of 8-4 AWG (10-16 sq mm), motor lead 10-4 AWG (6-16 sq mm).

3M™ Motor Lead Pigtail Splice Kits are designed for splicing motor lead cables to incoming feeder cables. These kits can accommodate pigtail (stub) connections of 5/8 kV with shielded feeders. The splice’s main component, the slip-on splice cover, is made from EPDM rubber. A mastic strip is used for the moisture seal. These kits are designed to be used with copper compression, one- or two-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, then insulated and sealed with the 3M™ Motor Lead Splicing Kits. 3M™ Scotchlok™ Copper Compression Lugs 30000 Series or other UL listed copper lugs, can be used (not included). Each kit contains: 3 pigtail lug covers, 2 cold shrink tubes, 9 mastic sealing strips, 3 rolls of Scotch® Stress Control Tape 2200, 3 bags of solvent cleaning cloths, 3 tubes of silicone grease, 3 rolls of Scotch® Linerless Rubber Splicing Tape 130C, 3 instruction sheets.