3M™ Particulate Filter, 7093, P100, 30 pairs/case
- 3M ID 7000002154
- UPC 50051131527053
Alert | Increased demand for respiratory protection products
3M is seeing an increased demand for respiratory protection products following the outbreak of a newly identified coronavirus (2019 novel Coronavirus, 2019-nCoV). In response, 3M is increasing respirator production to help meet demand, and working with distributors to help ensure they have inventory to meet end-user demand. 3M is committed to supporting the public health and governmental response to the Coronavirus while maintaining supply to existing customers.
Details
Highlights
- NIOSH approved for environments containing certain oil and non-oil based particles
- Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
- Use with NIOSH approved 3M™ Half and Full Facepiece Reusable Respirator 6000, 6500, 7500, 7800S or FF-400 Series; or the 3M™ Scott™ AV-3000 SureSeal or AV-3000 HT
- Filters can help reduce inhalation exposures to certain airborne biological particles
- Advanced Electret Media (AEM) is designed to provide lightweight, easy breathing comfort
- Quarter turn twist for a quick and easy installation
- Flame resistant
- Use for protection in hazardous environments. For workplace/occupational use only
The 3M™ Particulate Filter 7093 is NIOSH approved for environments containing certain oil and non-oil based particles. Use with 3M™ Respirators 5000 Series or 3M™ Cartridges 6000 Series with 3M™ Adapter 502, 3M™ Facepieces 6000 Series, or 3M™ Facepieces 7000 Series with bayonet filter holders. NIOSH approved for environments containing certain oil and non-oil based particles. Commonly used in the Abatement market, the filter is encapsulated in a hard shell to protect it from the decontaminating water spray showers.
When properly fitted, the 3M™ Particulate Filter 7093 can be used in a variety of applications including welding, brazing, torch cutting, metal pouring, soldering, and exposure to lead, asbestos, cadmium, arsenic, and MDA for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Do not use in environments that are Immediately Dangerous to Life or Health (IDLH).
Suggested applications
- Welding
- Brazing
- Torch cutting
- Metal pouring
- Soldering
- Abatement
Typical Properties
Resources
