3M™ High Flow Series Filter Cartridge
- | Select product options for IDs.
Details
Highlights
- Proprietary diamond pleat design optimizes usable surface area of the cartridge to maximize filter life
- Highest flow rate among 3M large format filters allows for operational flexibility to maintain process flow requirements
- Ergonomic horizontal design with a twist-to-lock handle allows for fast and easy cartridge installation and removal
- High flow capability enables fewer cartridges, which results in reduced cartridge handling and disposal, reduced filter change-out time and less individual cartridge seal points
- Outside-to-inside flow construction allows for compact housing design
- Absolute-rated polypropylene filter provides consistent performance, effluent quality and broad chemical compatibility
- Extensive food contact compliance* *The wetted component materials, when used in accordance with 3M product intended uses and instructions, have been evaluated and found to comply to United States Food and Drug Administration Title 21 Code of Federal Regulations (CFR) Sections 170-186 for Indirect Food Contact Compliance. For details related to specific use conditions or limitations for food contact applications please contact your 3M Representative for more information. 3M™ High Flow and HFM series cartridges are tested and certified by WQA against NSF/ANSI/CAN Standard 61 for material safety requirements only
- Looking for a high-quality filter cartridge with inside-outside flow capabilities that can be retrofitted to your existing system? View the 3M™ High Flow HFR Series Filter
3M™ High Flow Series HF and HFM Filter Cartridges offer high efficiency and outside-to-inside flow for food and beverage, industrial water and oil and gas applications. Each cartridge has an ergonomic design and a pleat style that provides a large surface area for a long life with a reduced number of change-outs and labour savings for your application.
3M™ High Flow Series Filter Cartridge
3M™ High Flow Series HF and HFM Filter Cartridges provide high flow capability in an outside-to-inside ?ow path that allows for small housing sizes and reduces the number of cartridges needed for your application, resulting in lower labor costs and a more sustainable solution. With a single open-end design and fewer individual cartridge seal points than 2.5 inch filters, these filter cartridges also help to reduce the chance of fluid bypass.
-
High flow capability.Designed to accommodate high flow rates for industrial applications, 3M™ High Flow Series Filters require fewer filters to maintain your process flow requirements.
-
Diamond pleat construction.Our proprietary diamond pleat design provides large surface area to help maximize filter loading capacity for a long filter life and a reduced number of required change-outs.
-
Horizontal set-up.3M High Flow Series Filters feature a horizontal ergonomic design in the 40 and 60 inch versions.
-
Ergonomic design.Featuring a twist-to lock mechanism, filter change-outs are quick and easy and do not require any special tools or hardware for installation or removal.
3M™ High Flow Series Filter Cartridges are available in two types of system designs.
-
3M™ High Flow HF Series Filter CartridgesThese high flow filter cartridges offer great particulate removal and surface filtration for a variety of industrial applications.
-
3M™ High Flow HFM Series Filter CartridgesFeaturing a thick media, these high flow filters are designed to alter deformables and organics. They also help prevent premature blinding of the filter’s outer surface, promoting fuller utilization of the media for an optimal combination of particle removal efficiency and contaminant holding capability.
Each grade of the 3M™ High Flow Series Filters systems is manufactured in polypropylene material. The blown microfibre (BMF) media provides high particle reduction efficiency and a broad chemical compatibility. No adhesives, binders, or silicone are used in the manufacturing process. O-rings are available in a variety of materials to suit your applications. The maximum design flow through the High Flow HF and HFM cartridges is 85 gpm for 10 inch length, 350 gpm for 40 inch length and 500 gpm for 60 inch length filter cartridges. Results will vary depending on process conditions. Ratings from 1 to 70 micron absolute or 5 micron nominal are available. The maximum forward differential pressure is 50psid at 68°F (3.4 bar at 20°C) and the recommended change-out pressure is 35psid at 68°F (2.4 bar at 20°C). Work with your local distributor to ?nd the right high flow filter housing for your industrial filtration needs.
Suggested applications
- Industrial: Process water, RO/membrane prefiltration, coolants, nozzle protection, boiler condensate, reclaimed water, waste water
- Chemical: Quench water, aqueous salt solutions, final products
- Petrochemicals: Waterflooding, produced water, enhanced oil recovery, completion fluids, amine sweetening, final products
- Food and beverage*: Process and blending water, D.E. trap filtration, barrel char removal, prefiltration for final bottling *For details related to specific use conditions or limitations for food contact applications please contact your 3M Representative for more information
Specifications
