3M™ Dyneon™ Fluoroelastomer FE 5610
- | Select product options for IDs.
Details
Highlights
- Low viscosity fluoroelastomer (FKM) suitable for use in injection and transfer molding
- Proprietary incorporated cure technology may help save time and increase throughput
- Improved mould release properties and better cure response to higher molding temperatures
- Can be used as a viscosity modifier
3M™ Dyneon™ Fluoroelastomer FE 5610 is a low viscosity copolymer of vinylidene fluoride and hexafluoropropylene with 66% fluorine. This fluoroelastomer (FKM) has proprietary incorporated cure technology that may help save time and increase throughput.
3M™ Dyneon™ Fluoroelastomer FE 5610 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The dry ingredients should be blended before adding to the masticated gum.
Suggested applications
- O-rings, seals, gaskets and hose for the following markets:
- Automotive Powertrain
- Transportation Fuel Systems
- Lubricant Application
- Chemical Processing
- Oil and Gas Exploration
Specifications
| Compression Set | 21 % |
| Cure Technology | Incorporated Cure |
| Elongation at Break | 210.0 % |
| Features | Temperature Resistance |
| Fluorine Content | 65.9 % |
| Industries | Rubber and Plastic, Electrical, Oil & Gas, Mining, CPI/Semicon, Transportation, Defense |
| Net Weight (Imperial) | 55 lb, 1320 lb |
| Net Weight (Metric) | 25 kg, 598.739 kg |
| Post Cure | 24 hr @ 260 °C |
| Press Cure | 5 min @ 177 °C |
| Product Colour | Off-white |
| Shelf Life | 3 yr |
| Specific Gravity | 1.8 |
| Tensile Strength (Imperial) | 1930.0 psi |
| Tensile Strength (metric) | 13.3 MPa |
Resources
Safety Data Sheets
Document Number: MSDS_3946696_CA_EN
(PDF)
