3M™ Dyneon™ Fluoroelastomer FE 5640Q
- | Select product options for IDs.
Details
Highlights
- Improved scorch resistance at high molding temperatures
- Intermediate viscosity fluoroelastomer (FKM) with 66% fluorine
- Proprietary incorporated cure technology may help save time and improve throughput
- Clean running with excellent mould release and improved cure technology, resulting in more consistent part size from successive molding cycles
3M™ Dyneon™ Fluoroelastomer FE 5640Q is an intermediate viscosity copolymer of vinylidene fluoride and hexafluoropropylene with 66% fluorine. This fluoroelastomer (FKM) has excellent mould release and improved cure technology, resulting in more consistent part size from successive moulding cycles.
3M™ Dyneon™ Fluoroelastomer FE 5640Q is a copolymer of vinylidene fluoride and hexafluoropropylene. It can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The dry ingredients should be blended before adding to the masticated gum.
Suggested applications
- For injection molding
- Compression set resistance
- Blown and Cast Film
- Pipe, tubing and other profiles
- Blow molding
- Wire and Cable and Fiber
Specifications
| Compression Set | 11 % |
| Cure Technology | Incorporated Cure |
| Fluorine Content | 65.9 % |
| Industries | CPI/Semicon, Defense, Electrical, Rubber and Plastic, Mining, Oil & Gas, Transportation |
| Net Weight (Imperial) | 55 lb, 1320 lb |
| Net Weight (Metric) | 25 kg, 598.739 kg |
| Post Cure | 24 hr @ 260 °C |
| Press Cure | 5 min @ 177 °C |
| Product Colour | Off-white |
| Shelf Life | 3 yr |
| Specific Gravity | 1.8 |
| Tensile Strength (Imperial) | 2370.0 psi |
| Tensile Strength (metric) | 16.3 MPa |
Resources
Safety Data Sheets
Document Number: MSDS_3950110_CA_EN
(PDF)
