3M™ Dyneon™ Fluoroelastomer FC 2145 is a low-viscosity copolymer of vinylidene fluoride and hexafluoropropylene with a 65.9% fluorine content. This fluoroelastomer (FKM) does not include an incorporated curative, but is curable with amine or bisphenol-type curing agents.
3M™ Dyneon™ Fluoroelastomer FC 2145 boasts numerous favourable attributes that make it suitable for use in transfer and injection molding, extrusion, calendering and coatings. It does not feature an incorporated curative, but is amine or bisphenol curable.
Brands | Dyneon™ |
Compression Set | 16 % |
Cure Technology | Raw Gum |
Fluorine Content | 65.9 % |
Industries | Rubber and Plastic, Electrical, Defense, Transportation, CPI/Semicon, Mining, Oil & Gas |
Net Weight (Imperial) | 55 lb |
Net Weight (Metric) | 25 kg |
Post Cure | 24 hr @ 260 °C |
Press Cure | 7 min @ 177 °C |
Product Colour | Straw |
Product Type | Dipolymer Fluoroelastomer |
Shelf Life | 3 yr |
Specific Gravity | 1.8 |
Tensile Strength (Imperial) | 1765.0 psi |
Tensile Strength (metric) | 12.2 MPa |
Safety Data Sheets
Document Number: MSDS_4006813_CA_EN
(PDF)