3M™ Dyneon™ Fluoroelastomer FC 2230
- | Select product options for IDs.
Details
Highlights
- Medium-viscosity raw gumstock
- Used in compression molding, extrusion, calendering and coatings
- Can be used to adjust physical properties and processability
- Amine or bisphenol curable
3M™ Dyneon™ Fluoroelastomer FC 2230 is a copolymer of vinylidene fluoride and hexafluoropropylene with a 65.9% fluorine content. This fluoroelastomer (FKM) is used for property modification and is suitable for compression moulding, extrusion, calendering and coatings. It is a medium-viscosity raw gumstock that is curable with amine or bisphenol-type curing agents.
3M™ Dyneon™ Fluoroelastomer FC 2230 has a number of attributes that make it suitable for compression molding, extrusion, calendering and coatings. The raw gum can be used to adjust physical properties and processability, e.g. crosslink density and viscosity
Suggested applications
- O-rings, seals, gaskets and hose for the following markets:
- Automotive Powertrain
- Transportation Fuel Systems
- Lubricant Application
- Chemical Processing
- Oil and Gas Exploration
Specifications
| Compression Set | 15 % |
| Cure Technology | Raw Gum |
| Fluorine Content | 65.9 % |
| Industries | Mining, Oil & Gas, Rubber and Plastic, Defense, Electrical, Transportation, CPI/Semicon |
| Net Weight (Imperial) | 55 lb |
| Net Weight (Metric) | 25 kg |
| Post Cure | 24 hr @ 260 °C |
| Press Cure | 7 min @ 177 °C |
| Product Colour | Translucent Amber |
| Product Type | Dipolymer Fluoroelastomer |
| Shelf Life | 3 yr |
| Specific Gravity | 1.8 |
| Tensile Strength (Imperial) | 1995.0 psi |
| Tensile Strength (metric) | 13.7 MPa |
Resources
Safety Data Sheets
Document Number: MSDS_4006821_CA_EN
(PDF)
