3M™ Dyneon™ Fluoroelastomer FT 2481 is composed of terpolymer of vinylidene fluoride, hexafluoropropylene, and tetrafluoroethylene; it is well-suited for compression moulding operations. With high fluorine content, it offers improved acid resistance, and resistance to volume swell by organic solvents, compared with conventional 66% fluorine fluoropolymers.
3M™ Dyneon™ Fluoroelastomer FT 2481 is a terpolymer gumstock without incorporated curatives. It can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The dry ingredients should be blended before adding to the masticated gum.
Brands | Dyneon™ |
Compression Set | 24 % |
Cure Technology | Raw Gum |
Fluorine Content | 68.6 % |
Industries | Oil & Gas, Rubber and Plastic, CPI/Semicon, Electrical, Defense, Mining, Transportation |
Net Weight (Imperial) | 55 lb |
Net Weight (Metric) | 25 kg |
Post Cure | 24 hr @ 260 °C |
Press Cure | 7 min @ 177 °C |
Product Colour | Translucent Amber |
Product Type | Terpolymer Fluoroelastomer |
Shelf Life | 3 yr |
Specific Gravity | 1.86 |
Tensile Strength (Imperial) | 2200.0 psi |
Tensile Strength (metric) | 15.2 MPa |
Safety Data Sheets
Document Number: MSDS_4006953_CA_EN
(PDF)