3M™ Damping Foil 2552
- | Select product options for IDs.
Details
Highlights
- Dead-soft aluminum foil is designed to application to vibrating panels and support members
- Tape controls resonate vibrations through temperatures ranging from -25°F/32°C to 175°F/180°C with peak damping from 32°F/0°C to 140°F/60°C
- Viscoelastic, acrylic polymer adhesive is optimized to convert vibrational energy to negligible heat that readily dissipates
- Withstands exposure to weathering, moisture, and UV Rays
- Meets flame retardant requirements of F.A.R. 25.853(a) and can pass ASTM E-162 and ASTM-E 662 for flammability and smoke generation
- Linered for die-cutting applications in a variety of industries
- Heat-resistant and light-reflective tape protects surfaces and enhances lighting efficiency
3M™ Damping Foil Tape 2552 is constructed of a dead soft, aluminum foil constraining layer and coated with a pressure-sensitive, viscoelastic, acrylic polymer adhesive. This unique construction provides the ability to control resonant vibrations in a variety of applications and across a broad spectrum of temperatures.
3M™ Damping Foil Tape 2552 is an aluminum foil backed, anti-vibration tape. It is designed to reduce structure-borne noise and fatigue in metal, composite panels and support structures. With a viscoelastic, acrylic polymer adhesive this tape is easy to apply and it adheres well to metal. It can achieve effective damping with as little as 20% surface coverage. This durable tape will resist moisture, weather, UV degradation and flame. It is a long aging tape designed to specifically perform in a wide variety of temperatures (-25 °F/32 °C to 175 °F/180 °C) with peak damping from 32 °F/0 °C to 140 °F/60 °C. The linered construction provides the ability to die cut this product. 3M™ Damping Foil Tape 2552 meets the requirements of F.A.R. 25.853(a) and can pass ASTM E-162 and ASTM-E 662 for flammability and smoke generation.
Suggested applications
- General industrial applications to mitigate vibration which produces noise and fatigue
- Appliance
- Automotive
- Aerospace
Typical Properties
| Adhesive Type | Viscoelastic Polymer, Acrylic |
| Applications | Ductwork |
| Back Side Adhesive Thickness (Imperial) | 5 Milli-inch (mil) |
| Back Side Adhesive Thickness (Metric) | 0.13 mm |
| Backing (Carrier) Material | Aluminum |
| Backing (Carrier) Thickness (Imperial) | 10 Milli-inch (mil) |
| Backing (Carrier) Thickness (Metric) | 0.25 mm |
| Backing Material | Aluminum Foil |
| Brands | 3M™ |
| Elongation at Break | 12.0 % |
| Industries | Aerospace, Automotive, Specialty Vehicle, Electronics, Metalworking, Appliance, Construction, General Industrial, Military and Government, Transportation |
| Maximum Operating Temperature (Celsius) | 80 °C |
| Maximum Operating Temperature (Fahrenheit) | 175 null |
| Minimum Operating Temperature (Celsius) | -32 °C |
| Minimum Operating Temperature (Fahrenheit) | -25 null |
| Primary Liner | Polycoated Paper |
| Product Colour | Silver |
| Smallest Saleable Unit | Roll |
| Tensile Strength (Imperial) | 126.0 lb/in, 2016.0 oz/in |
| Tensile Strength (metric) | 220.7 N/100mm, 2205 N/100mm |
| Total Tape Thickness without Liner (Imperial) | 15 Milli-inch (mil) |
| Total Tape Thickness without Liner (metric) | 0.38 mm |
| Units per Case | 5.0 |
| Overall Length (Imperial) | 36 yd |
| Overall Length (Metric) | 32.9 m |
| Overall Width (Imperial) | 2 in, 10 in |
| Overall Width (Metric) | 5.1 cm, 25.4 cm |
Resources
23-936450-e4e-engineered-tapes-reference-guide-pdfa.pdfCatalogs
(PDF, 9MB)
Similar products
| Backing (Carrier) Thickness (Imperial) | 10 Milli-inch (mil) | |||
| Overall Width (Metric) | 5.1 cm, 25.4 cm | |||
| Overall Width (Imperial) | 2 in, 10 in | |||
| Backing (Carrier) Thickness (Metric) | 0.25 mm | |||
| Adhesive Type | Viscoelastic Polymer, Acrylic |
3M™ Damping Foil 2552
3M™ Vibration Damping Tape 436
3M™ Layered Viscoelastic Damping Polymer, SJ2040X, white, 4.0 in x 30.0 yd (10.2 cm x 27.4 m)