3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP810
- | Select product options for IDs.
Details
Highlights
- Low-odour adhesive is ideal for any setting where harsh fumes or flammability are an issue
- Provides high shear and peel strength and is toughened for impact resistance
- Bonds oily metals with minimal surface prep
- Bonds most plastics, composites, and metals
3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP810 is a toughened two-part acrylic adhesive that cures at room temperative and is specially formulated to bond oily metals, plastics, and other surfaces. With a low odour and non-flammable properties, 3M™ Scotch-Weld™ Acrylic Adhesive DP810 contributes to a safer work environment compared to typical acrylic adhesives.
This unique acrylic not only gives you strong shear and peel strength, but also good impact resistance for durability to meet demanding end-use applications. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. With a mix ratio of 1:1, 3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP810 provides a 10-minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.)
Suggested applications
- Ideal for general industrial, sporting goods, solar energy, wind energy, composites, electronics, military, transportation, and aerospace applications
- Designed for bonding, gluing, adhering, joining, attaching, assembling
- Alternative to riveting or welding, bolt setting, frame building, rivet-free assembly
Typical Properties
| Adhesion Strength (Imperial) | 480 oz/in |
| Adhesive Type | Acrylic |
| Applications | Impact Resistance |
| Bond Flexibility | Semi-rigid |
| Brands | Scotch-Weld™ |
| Container Size (Imperial) | 1.64 fl oz, 6.76 fl oz, 13.52 fl oz |
| Container Size (Metric) | 48.5 mL, 200 mL, 400 mL |
| Design Challenges | Noise Vibration & Harshness Control NVH, Impact & Shock Absorption |
| Full Cure Time | 8 hr - 24 hr |
| Industries | Woodworking, Signage, Specialty Vehicle, Metalworking, Military and Government, Transportation, Consumer Goods, Electronics, General Industrial, Construction |
| Open Time | 10 min @ 72 °F (22 °C) |
| Performance Level | Best |
| Physical Form | Flowable Liquid |
| Product Form | Each |
| Set Time | 10 min |
| Shear Strength | 3600 psi |
| Smallest Saleable Unit | Each, Pack, Drum |
| Specific Gravity | 1.07 |
| Storage Temperature (Celsius) | 0°C, 4 °C |
| Storage Temperature (Fahrenheit) | 32 °F, <=40 Degree Fahrenheit |
| Surface Type | Painted, Unpainted, Oily, Powder Coated, Smooth |
| Units per Case | 1.0, 6.0, 12.0 |
| Volume (Imperial) | 1.64 fl oz, 4.4 fl oz, 6.76 gal, 13.52 fl oz |
| Volume (metric) | 16.7 mL, 48.5 mL, 200 L, 400 mL |
| Work Life | 10 min |
Resources
Safety Data Sheets
Document Number: MSDS_0862672_CA_EN
(PDF)
Safety Data Sheets
Document Number: MSDS_0862524_CA_EN
(PDF)
Safety Data Sheets
Document Number: MSDS_0862391_CA_EN
(PDF)
